9YKJ-5552 Straw Balerintroduce

Straw baler is a fixed baler wrapping machine.

Equipment pictures

After bundling and packaging, the materials can save storage space, extend the feeding time of green straw, and naturally ferment after packaging and sealing, producing probiotics, beneficial bacteria, lactic acid bacteria, and protein, which can be easily absorbed by livestock such as cattle and sheep. The growth rate will increase by about 2%, greatly reducing the cost of feed transportation and storage and reducing the labor intensity of workers. It has brought tangible economic benefits to animal husbandry.

Product parameters

Working principle

The straw baler consists of two parts: baling and coating. When starting to use the integrated machine, we should first place the hemp rope on the baler, thread the hemp rope into the clamp tube, and then insert the film feeding roll into the support shaft of the film feeding frame according to the instructions.

Put it away, manually feed the fixed bin through the front of the machine. When the grass bundle is large enough to reach a certain density between the fixed bin and the movable bin, the inert roller above the movable bin and the signal wheel on the left side will rotate evenly. The operator will operate the winding clutch handle, and the machine will start to loop and tie the rope back and forth. After winding the rope once, the hemp rope will automatically cut off, and the bin will be opened immediately for bundling. The grass bundle will directly fall onto the rotating frame of the wrapping machine through the conveyor belt, and the film will be pulled out by hand.

Activate the rotation button, and the rotating frame drives the grass bundle to rotate. The operator should synchronously and quickly press the film towards the middle of the grass bundle, and rotate it once with the grass bundle, then immediately release it. The silage PE film gradually wraps around the grass bundle layer by layer, and the grass bundle rotates with the rotating frame. When the film reaches the set number of layers (such as three layers), the clutch automatically disengages, and the rotating frame stops. The operator cuts the grass film between the grass bundle and the film transport frame, and presses the cut end of the grass film into the overlapping end face of the grass bundle.

Then remove the wrapped hay bales from the wrapping machine and arrange them neatly. The highest stack should not exceed four bales, as being too high or heavy can easily deform the bottom layer of the film, causing air to enter and leading to grass spoilage and mold damage.

Product details of straw baler

Production site of straw baler

Performance characteristics

1. Stop digging silage ponds, 2Long preservation time(Natural preservation for a long time)3 years）3. Low packaging cost, 4. Labor saving (complete set of equipment required)2-3Personal work)

5. Space saving, convenient transportation of feed, 6. Worry saving, equipmentEasy to operate7. Various special-shaped machines can be customized according to customer requirements