Jiangsu Du'an Environmental Protection has continuously introduced advanced technology and vigorously promoted technological innovation. Based on the first generation of submersible jet aerators developed, a new type of deep-water self-priming submersible jet aerator has been successfully developed. Jiangsu Du'an Environmental Protection has summarized a new design and testing method through systematic research, which has enabled the overall performance of the product to reach the advanced level of similar foreign products, and can directly compete with foreign manufacturers in the market. The new deepwater self-priming submersible jet aerator has a compact structure, simple operation and maintenance, and convenient and fast installation. While maintaining its low-cost characteristics, its performance has been greatly improved. Without the need for compressed air, the submersible aeration depth can reach10mThe bubbles are finer, which increases the contact area between the air and the aeration medium, effectively improving the oxygen transfer rate. The matching non clogging submersible electric pump adopts the sealing technology of the submersible sewage pump used in the Three Gorges of the Yangtze River, greatly improving the reliability of the submersible jet aerator.

Submersible Aeration Mixing Dual purpose MachineIntroduced the sealing technology of German submersible motors and submersible aerators, and now applied for national patent ZL002429578. The function of this machine is a amphibious aeration device (high-speed and low-speed mixing), which can be used as an aeration and mixing device in various sewage treatment processes. It is particularly suitable for deep tanks (with a maximum depth of 20 meters) for aeration and requires high oxygen transfer efficiency.

QSB type submersible jet aeratormain scope:

　　1. Deep water submersible aerator;

　　2. SBR biochemical tank aeration and agitation;

　　3. Aeration and agitation of biological nitrification denitrification tank;

　　4. Sludge aeration and mixing;

　　5. Advanced treatment process for high organic wastewater.

Characteristics of submersible aerator:

　　1. Compact structure and small footprint;

　　2. Open structure without blockage;

　　3. High transmission efficiency, uniform and soft mixing;

　　4. Small gas pressure loss and low energy consumption;

　　5. The volume can be adjusted according to technical requirements;

　　6. The motor protection function is complete, the sealing is reliable, and it is easy to achieve automatic control;

　　7. Easy installation, maintenance, and repair.

Structure and process flow

The deep water aeration mixer is powered by a submersible motorReducer, impeller, mixing chamber, foundation, and air inlet pipe, etc.

Rotating impeller in deep water aeration mixing chamberInhalation of compressed air. Due to the special structure of the impeller and the relatively rotating mixing chamber, the air is cut into small foam, while water is sucked in and the completely mixed air is chopped, and the gas-liquid mixture is horizontally sprayed into the mixing chamber through the channel. In this way, the filling and aeration of micro bubble liquid are uniform, which improves the contact between the gas-liquid two-phase surfaces and enhances the efficiency of the aeration system. The formation and injection of gas and liquid with high turbulence over such a large area greatly improve the oxygen transfer rate and oxygen filling.

Troubleshooting method for jet aerator

Any adjustment of the equipment must be approved by our company!