SZG series double cone rotary vacuum dryer-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13601516395
Address

Xiyuan Road, Changjing Industrial Park, Jiangyin City

Contact Now

SZG series double cone rotary vacuum dryer

Contact Supplier

More Products

Product details

Main purpose
This machine is suitable for the concentration, mixing, drying of powdered, granular, and fibrous materials in industries such as chemical, pharmaceutical, and food, as well as materials that require low humidity drying (such as biochemical products). It is also more suitable for drying materials that are prone to oxidation, volatilization, heat sensitivity, strong irritation, toxic substances, and materials that do not allow crystal destruction.

characteristic
1. When oil is heated, automatic constant temperature control is used to dry biochemical products and mineral raw materials. The temperature can be between 20-160 ℃ and within ± 2 ℃.
2. High thermal efficiency, more than twice as high as a typical oven.
3. Indirect heating ensures that the material is not contaminated and meets the 'GMP' requirements. The equipment maintenance operation is simple and easy to clean.

Working principle
Heat is transferred to the dried material through the inner shell in a sealed interlayer using thermal energy sources such as hot water, low-pressure steam, or thermal oil.
Under the power drive, the tank rotates slowly, and the materials inside the tank continuously mix, thereby achieving the purpose of enhancing drying.
The material is in a vacuum state, and the decrease in vapor pressure causes the water (solvent) on the surface of the material to reach saturation and evaporate, which is promptly discharged and recovered by a vacuum pump. The moisture (solvent) inside the material continuously permeates, evaporates, and is discharged to the surface, and these three processes are carried out continuously, achieving the drying purpose of the material in a very short time.

	Simplified structural diagram:

Technical Parameter

model	Type 100	350 type	500 type	800 type	1000 type	1500 type	2000 type	3500 type	4500 type
Tank capacity (L)	100	350	500	800	1000	1500	2000	3500	4500
Loading capacity (L)	≤50	≤175	≤250	≤400	≤500	≤750	≤1000	≤1500	≤2000
Speed (r/min)	6	6	6	6	6	6	5	4	4
Motor power (kw)	1.1	1.5	2.2	2.2	3	4	5.5	7.5	11
Floor area (length x width) (mm)	2160×800	2260×800	2350×800	2560×1000	2860×1300	3060×1300	3260×1400	3760×1800	3960×2000
Rotation height (mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100
Design pressure inside the tank (Mpa)	-0.1～0.15
Design pressure of jacket (Mpa)	≤0.3
Working temperature (℃)	Can interior ≤ 85, jacket ≤ 140
Heating medium	Steam, hot water, thermal oil
Weight (kg)	825	1350	1650	1800	2100	2300	3000	4500	5400

Installation diagram:

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content