one、Product Features:

SHJ-6Constant temperature water bath magnetic stirrerAdopting programmable integrated voltage regulator circuit, high-quality DC motor, low noise, stable speed, and speed not affected by voltage fluctuations.6The mixing and temperature at the workstation can be controlled separately without interfering with each other, using a constant temperature methodLEDDisplay. It has dual functions of water bath constant temperature heating and stirring. Equipped with a unique insulation and cooling system.

2、 Product Usage:

Widely used in laboratories for distillation, drying, concentration, and temperature soaking of various liquid compounds in chemical or biological products, and can also be used for other temperature tests. Can be done simultaneously6Sample testing, time-saving and efficient.
3、 Product features:
1The water bath pot is made of stainless steel, which has superior corrosion resistance.
2Adopting an intelligent temperature controller with high temperature control accuracy, it can set temperature and display temperature automatically, and the digital display is intuitive and accurate.
3Stepless speed regulation, stable rotational speed.
4Can be heated and stirred at a constant temperature simultaneouslyNEach sample can be individually controlled for temperature and stirring speed.
5The stirrer is refined from polytetrafluoroethylene and high-quality magnetic steel, which is resistant to high temperature, wear, chemical corrosion, and has strong magnetism. It can perform precise and stable constant temperature stirring and mixing of liquid solutions in closed containers over a wide speed range.

4、 Technical parameters:
1Electricity Source:220V 50HZ
2Mixing capacity:6×1000mlZ is large6×2000ml(aqueous solution)
3Heating power:400W×6
4Constant temperature range: room temperature-99.9℃, the heating temperature required for each workstation can be set separately.
5Temperature control accuracy: ≤±0.5℃
6, transfer Speed:0-2600turn/Divided and infinitely adjustable, the speed of each workstation can be individually controlled.
7The pot ruler Inch: ￠200×95mm×6a
Note: If a transparent tempered glass lid is required, please specify; Mixing capacity and device settings can be customized according to customer requirements; Price negotiable!
5SHJ-6Constant temperature water bath magnetic stirrerSimilar products include:

VIInstructions for Use:

1Place the flask containing the solution stirrer in the pot or directly place the stirrer in the container

2Connect the power, turn on the power switch, turn on the timer, turn on the mixing switch, and turn the speed control knob to the desired speed

aset temperature,pressSETThe key can set the temperature, pressSETThe data on the digital display below the key flashes (Normal measurement in the upper row), indicating that the instrument has entered the temperature setting state. Press the △ key to increase the set value, press the ▽ key to decrease the set value, and continue to press the increase or decrease key to accelerate the change of the set value. Press againSETThe key instrument panel returns to normal working state, and the temperature setting is completed

bCorrection of sensor errors: When confirming that the displayed value of the instrument is not the correct measurement value, the displayed value can be correctedSETPress the key for three seconds to enter the inner menu of the instrument panel and select the parametersSCAfterwards, by using the △ and ▽ keys, this parameter can be modified, and the correction range for sensor errors is+50to-50After the correction is completed, press againSETPress the key to exit in three seconds. When the instrument is shipped, the correction value is0When using, it is necessary to prevent correcting instruments that display correctly to incorrect ones

cStarting self-tuning, this product can adapt to the vast majority of control systems. Only when the control effect is particularly unsatisfactory, the direction will start self-tuningSETPress the key for three seconds to enter the inner menu of the instrument panel and select the parametersATAfterwards, use the △ key ▽ key to enable self-tuning. At this pointATThe indicator light starts flashing, and the instrument enters the automatic parameter setting working state. The instrument controls the heating system and fluctuates around the set point2Next time, whenATThe light off is the end of self-tuning, newPIDThe parameters are locked in the chip,

Adjust the speed control knob to the desired speedAfter completing the work, place the speed control knob in the minimum position, set the temperature control switch to the minimum position, turn off the power switch, and cut off the power supply5Clean the working surface thoroughly