1： Product Overview

SCYG410-S small pressure transmitter, with silicon pressure resistance sensing element as the core of the sensor, measures gauge pressure, negative pressure, and absolute pressure. The core components of the product are selected from international first-line brands, with built-in signal conditioning circuits that convert sensor signals into standard current, voltage, or digital signal outputs. It can be directly connected to computer interface cards, control instruments, intelligent instruments, or PLCs. Stainless steel sealed structure, small volume, light weight. Easy and simple installation, strong anti-interference, vibration and impact resistance, widely used in the measurement and control of liquids and gases in industries such as process control, aviation, aerospace, automotive, medical equipment, etc.

2： Product Features

1. Stainless steel structure, small size, light weight, anti-interference, corrosion-resistant

2. High precision, high output, shock resistance, and vibration resistance

3. Wide voltage power supply, multiple pressure interfaces

4. Equipped with short-circuit protection and reverse polarity protection

3： Typical applications

Industrial measurement and control hydraulic system pneumatic equipment energy and water treatment process control engineering machinery engine control

4： Performance indicators

5： Selection Table

Please contact the sales engineer to assist you in selecting and confirming specific technical parameters.

6： Outline structure diagram

For more sizes, please consult us

7： Precautions for installing pressure sensors

1. Please measure the medium compatible with the sensor membrane. The medium temperature is within 80 ℃.

When measuring liquids, the pressure tap should be opened at the bottom of the side of the pipeline to prevent sedimentation inside the liquid from accumulating in the pressure tap. The installation position should avoid direct impact of fluid to prevent the formation of water hammer effect, in order to ensure the service life of the pressure sensor.

When measuring gas, the pressure tap should be opened at the top of the pipeline, and the pressure transmitter should also be installed at the upper part of the process pipeline, so that accumulated liquid can easily flow into the process pipeline.

When there is debris in the application site medium, the pipeline should be cleaned in a timely manner to prevent sediment from depositing in the conduit.

5. Please follow the provided user manual for on-site wiring.

Selection reminder:

When selecting, please pay attention to the compatibility between the tested medium and the contact part of the product.

If the ordered product requires a metrological verification certificate or other special requirements, please consult with our company and indicate it in the order.