LIN linear bearingHigh load-bearing capacity
LIN LINEAR BEARING HIGH LOAD CAPACITY
![]() |
LIN linear bearings, as a type of linear sliding bearing, have their working surfaces in contact with the shaft surface in a surface form, while the ball linear bearings used for transmission make contact with the shaft surface in a dotted line form; This determines that LIN series linear bearings with larger contact surfaces have higher load-bearing capacity than ball linear bearings. |
LIN linear bearingDry running in dirt and dust
LIN LINEAR BEARINGS RUN DRY IN DIRT AND DUST
LIN linear bearing sliding film is a high-performance material specially developed for dry operation; The special patented structural design allows the bearing to operate smoothly in dirt, dust, or sand particles. The spiral structure design enables dirt to quickly fall into the designed groove and be carried out of the linear bearing system through continuous linear motion. However, traditional metal rolling linear bearings are prone to jamming, ball running, and even shaft strain in the presence of dirt, dust, or sand particles. |
![]() ![]() |
LIN linear bearingLow noise operation LIN LINEAR BEARING LOW NOISE OPERATION Metal ball linear bearings emit noise due to the impact between the ball and the cage body during movement, and this noise increases with increasing speed. However, the working surface of LIN linear bearings is designed for sliding friction, so they can only produce low friction sounds during operation, resulting in very low operating noise. |
LIN linear bearingAllow frequent contact with cleaning solution ALLOW FREQUENT CONTACT WITH CLEANING FLUIDS LIN linear bearings are often used in the guiding mechanism of food packaging machinery and are often washed away by cleaning solutions; Years of use have proven that LIN linear bearings, as designed, are capable of withstanding corrosion from various alkaline cleaning solutions and can even operate as a whole immersed in liquid media. |
Sliding film performancedata table
SLIDING FILM PERFORMANCE DATA SHEET
term eye |
treetop accurate |
unit |
CSB-EPB13 |
CSB-EPB5 |
density | ISO1183 | g/cm3
|
1.48 |
1.44 |
colour | yellow |
black |
||
RH50/+23Moisture absorption at ℃ | ASTMD570 |
% |
0.2 |
0.1 |
Maximum water absorption rate | % |
1.2 |
0.5 |
|
Coefficient of dynamic friction of steel - dry | 0.05-0.15 |
0.09-0.25 |
||
Maximum P.V value | N/mm2×m/s
|
0.4 |
1.5 |
|
Bending modulus | ISO178 |
MPa |
2400 |
7900 |
bending strength+23℃ | ISO178 |
MPa |
75 |
170 |
compressive strength | MPa |
60 |
100 |
|
Maximum allowable surface static pressure+20℃ | MPa |
35 |
150 |
|
Shore hardness | ISO868 |
D |
74 |
85 |
Continuous operating temperature | ℃ |
-50/+90 |
-100/+250 |
|
Short term operating temperature | ℃ |
-50/+120 |
-100/+315 |
|
Thermal conductivity | ASTME1461 |
W/m*k |
0.25 |
0.6 |
Linear coefficient of thermal expansion+23℃ | ASTMD696 |
K-1×10-5
|
9 |
5 |
combustion performance | UL94 |
HB |
VO |
|
Volume resistivity | IEC60093 |
Ωcm |
>1015 |
>108 |
surface resistivity | IEC60093 |
Ω |
>1012 |
>107 |
Due to a large number of sizes, we were unable to upload all of them. For other sizes, please consult customer service for customization
LIN linear bearingHigh load-bearing capacity
LIN LINEAR BEARING HIGH LOAD CAPACITY
Nominal inner diameter |
Maximum permissible dynamic load |
Maximum permissible static load |
||
LIN-11, 13 sliding film series |
LIN-12 sliding film series |
LIN-11, 13 sliding film series |
LIN-12 sliding film series |
|
10 |
870N |
780N |
6090N |
5460N |
12 |
1152N |
1008N |
8064N |
7056N |
16 |
1728N |
1440N |
12096N |
10080N |
20 |
2700N |
1800N |
18900N |
12600N |
25 |
4350N |
3000N |
30650N |
21000N |
30 |
6120N |
4500N |
42840N |
31500N |
40 |
9600N |
7200N |
62700N |
50400N |
50 |
1500N |
10500N |
105000N |
73500N |
Due to a large number of sizes, we were unable to upload all of them. For other sizes, please consult customer service for customization
Due to a large number of sizes, we were unable to upload all of them. For other sizes, please consult customer service for customization
maintenance-freeBearing guide rail
TECHNICAL INFORMATION
Wanma Company's spot shopping mall Focus on the development and sales of long-life, maintenance free, corrosion-resistant, high-precision, and noise free transmission products —— Finished product reduced by 40%/weight reduced by 80%/maintenance free self-lubricating/quiet operation without noise/dust and dirt resistance/low friction coefficient/light weight/predictable/corrosion-resistant/cost reduced by 40%/weight reduced by 80%/maintenance and lubrication reduced/billions in stock/customizable Consultation Hotline: |
Industry ApplicationsSolution
TECHNICAL INFORMATION