Introduction to s49 series rotary vibrating screen

S49 seriesRotary vibrating screenAlso known as the three-dimensional vibrating screen, it is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to quickly change the screen and has a fully enclosed structure. It is suitable for screening and filtering materials such as particles, powder, and mucus. As a professional manufacturer of rotary vibrating screens, we have tracked and understood the needs of our customers for a long time, and designed rotary vibrating screens that meet the screening needs of different customers.

Structure principle of s49 series rotary vibrating screen

The s49 series rotary vibrating screen uses an upright motor as the excitation source, and eccentric weights are installed at the upper and lower ends of the motor to convert the motor's rotational motion into horizontal, vertical, and inclined three-dimensional motion, which is then transmitted to the screen surface. Adjusting the phase angle between the upper and lower ends can change the motion trajectory of the material on the screen surface.

S49 series rotary vibrating screen material trajectory diagram:

S49 seriesRotary vibrating screenCategory:

Ordinary rotary vibrating screen:The ordinary rotary vibrating screen is mainly used for screening general powders and small particle materials.

Gate type rotary vibrating screen:Gate type rotary vibrating screen is a product derived from practical applications, mainly used for screening ultra light and ultrafine materials. Users can perform long-term screening operations with one feeding, while controlling the opening and closing of the gate to achieve good screening. This screening operation is mostly used in industries such as traditional Chinese medicine powder and flower powder.

Edge type rotary vibrating screen:The edge type rotary vibrating screen is a filtering type screening equipment that increases the inlet on the basis of the ordinary rotary vibrating screen and is designed at a special angle to prevent liquid splashing. It has a wide range of applications in industries such as paint, water filtration, and pulp filtration. This series of rotary vibrating screens is a special, high viscosity, and fine-grained material screening equipment designed by our factory based on the absorption of advanced domestic and foreign technologies. It is mainly used for screening fine powder, micro powder, as well as dry and wet materials.

Pneumatic pulse type:Pneumatic rotary vibrating screen is a traditional rotary vibrating screen that introduces a low amplitude, high-frequency pneumatic transducer on the screen mesh. It converts pneumatic energy into pulse energy that acts on the screen mesh, causing high-frequency jumping of the screen mesh. The screening accuracy is controlled by adjusting the gas supply volume, without compromising the screen mesh, resulting in high output and precision. Specially suitable for high value-added fine screening and high viscosity high-precision liquid filtration.
Pneumatic rotary vibrating screen is a new type of product that combines a pneumatic controller with a vibrating screen. The pneumatic energy is converted into the pulse vibration energy of the screen itself, which keeps the material on the screen surface in a high-frequency jumping state, thereby suppressing factors such as adhesion, friction, flattening, and wedging, and solving screening problems such as strong adsorption, easy agglomeration, high static electricity, high precision, high density, irregularity, and light density. This makes ultrafine powder screening no longer difficult, especially suitable for screening high-quality and fine powders and high-precision liquids with high viscosityBody filtration.

Characteristics of s49 series rotary vibrating screen

☆ High efficiency, exquisite and durable design, can sieve any powder or mucus.
Easy to change the network, simple to operate, and easy to clean.
The mesh is not blocked, the powder does not fly, and it can be sieved up to 500 mesh or 0.028mm.
☆ Impurities and coarse materials are automatically discharged, allowing for continuous operation.
Unique grid design, the screen has a long service life and can be replaced quickly in only 3-5 minutes.
☆ Small size, no space occupation, easy to move.
The screening machine can reach up to five layers, and it is recommended to use three layers.

S49 seriesRotary vibrating screenApplicable industries:

Chemical industry: resins, coatings, chemical drugs, cosmetics, paints, laundry detergents, etc.
Food industry: flour, sugar powder, starch, salt, Rice noodles, milk powder, soybean milk, egg powder, soy sauce, fruit juice, etc.
Ceramic industry: ceramic slurry, clay slurry, ceramic raw materials, etc.
Abrasive industry: corundum, silicon carbide, diamond sand, quartz sand, etc.
Pharmaceutical industry: pharmaceutical intermediates, traditional Chinese patent medicines and simple preparations, Chinese medicine powder, Chinese and western medicine liquid, etc
Pollution treatment: waste oil, wastewater, dyeing and finishing wastewater, additives, activated carbon, etc.
Refractory materials: kaolin, lime, alumina, heavy calcium carbonate, etc
Metal and metallurgical mining: iron powder, zinc powder, aluminum powder, lead powder, copper powder, ore, alloy powder, welding rod powder, manganese dioxide, electrolytic copper powder, electromagnetic materials, etc

General structural diagram of s49 series rotary vibrating screen:

S49 series rotary vibrating screen working simulation diagram:

S49 seriesRotary vibrating screenTechnical parameters:

S49 series rotary vibrating screen main size technical parameters:

Rotary vibrating screenIt is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to quickly change the screen and has a fully enclosed structure. It is suitable for screening and filtering materials such as particles, powder, and mucus. The rotary vibrating screen is driven by an upright motor as the excitation source. Eccentric heavy hammers are installed at the upper and lower ends of the motor to convert its rotational motion into horizontal, vertical, and inclined three-dimensional motion, which is then transmitted to the screen surface. Adjusting the phase angle between the upper and lower ends can change the motion trajectory of the material on the screen surface. The motor, vibration isolation device (a set of supporting springs), and base are composed of several parts. Among them, the screen cover and frame are the vibrating parts, while the other parts are the non vibrating parts. In addition, the base also has a supporting function. The screen frame is the main vibrating part of the rotary vibrating screen. The screen frame is usually made of rolled and welded plates, with a receiving ring at both the upper and lower ends, and a flange ring inside the lower part for fixing the screen components and other structures.