VIP member
Rockwell hardness tester robot system
The Rockwell hardness tester robot system consists of the TIME R3-660 industrial robot, TIME H1110 Rockwell hardness tester, and other auxiliary fixtu
Product details
1、 Rockwell Hardness Tester Robot System - Product Overview:
System Overview:
The fully automatic Rockwell hardness tester robot system consists of the TIME R3-660 industrial robot, TIME H1110 Rockwell hardness tester, and other auxiliary fixtures. This system uses industrial robots to load and unload materials for the Rockwell hardness testing machine, achieving fully automatic hardness testing of materials.
System composition:
1 Time H1110 Rockwell hardness tester
1 Time R3-660 robot
2 sets of sample positioning disks
1 set of robot gripper
System Introduction:
The TIME R3-660 six joint industrial robot consists of a TC-10 controller, mechanical body, teaching programmer, etc. It can perform industrial operations such as welding, handling, loading and unloading, spraying, etc. It is mainly used in electronic appliances, food, biopharmaceuticals, universities, etc. for industrial operations and teaching demonstrations. The compact appearance and small body mass enable the robot to be flexibly installed in various work sites, meeting the requirements of robots in different environments.
2、 Rockwell hardness tester robot system - Technical parameters:
Performance parameter indicators of the entire Rockwell hardness tester：
serial number
item eye name call, name, say, weigh
skill technique ginseng number
1
complete
Luo
surname
hard
degree
plan
Hardness scale rockwell
HRATheHRBTheHRCTheHRDTheHRETheHRFTheHRG.；HRHTheHRKTheHRLTheHRMTheHRPTheHRRTheHRSTheHRV Table Luo
HR15NTheHR30NTheHR 45NTheHR15TTheHR30TTheHR45T；
HR15WTheHR30WTheHR45WTheHR15XTheHR30XTheHR45XTheHR15YTheHR30YTheHR45Y test force Initial test force
29.42N/3 KgfThe98.07N/10 Kgf Total test force
147.1N/15KgfThe294.2N/30Kgf 441.3N/45Kgf 588.4N/60Kgf 980.7N/100 Kgf 1471N/150 Kgf Experimental force error
Initial testing forceFo(In the main experimental forceF,Before application and after removal)The maximum allowable error is in degrees2% Total experimental forceFThe maximum allowable error should be in degrees1.0%.
Indentation depth measuring device
0.001%FNYes, that's right(A-K)The maximum allowable error for the ruler indentation depth measurement device is in degrees Celsius Yes, that's rightNAndTThe maximum allowable error of the ruler is in units Hardness indication * large allowable error And repeatability of indication values Compliant withGB 230.2-2012Table for Inspection and Calibration of Partial Hardness Testers in Metal Rockwell Hardness Test5The regulations Accessibility Upper and lower limit settings, over tolerance discrimination alarm; Data statistical analysis, calculate the mean, standard deviation, * large and * small values; Ruler conversion can convert test results intoHBTheHVValue and strength σbSurface correction, automatically correcting the measurement results of cylindrical and spherical surfaces.
speed range
Speed accuracy
±1%
*Large vertical testing space
*Large level testing space
2
X-Y automatic
Carrier platform
Horizontal stageX-Yitinerary
30 ×30millimeter
Rated bearing capacity
movement speed
adjustable
Control method
Computer control;X-YControl mode of physical platform computer
Positioning movement, fixed-point movement, directional movement.
High precision and repeatability
Rockwell hardness tester robot system Rockwell hardness tester robot system Rockwell hardness tester robot system
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-