VIP member
Rfid anti-counterfeit Shuoyuan label
Thin base paper type fragile paper self-adhesive surface material is suitable for printing and processing in the form of roll drum paper on label mach
Product details
Product parameters:
Product size |
R30mm (customizable) |
agreement |
15693 |
integrated chip |
Icode2 (customizable) |
Operating Frequency |
13.56MHz |
Storage |
1024bit |
Encapsulant |
Fragile materials |
Recognition distance |
5-10CM |
work environment |
-40 to+85 ℃ |
Data validity period |
10 Years |
Read and write frequency |
Erased 100000 times |
brief introduction |
Anti tearing, reuse, independent verification and other methods are used to achieve anti-counterfeiting. |
purpose |
Applied to alcoholic beverages, cosmetics, pharmaceuticals, tea, high-end nutritional supplements, luxury goods, and car glass to achieve anti-counterfeiting, tear proof, and identification functions. |
notes |
Various parameters and materials of this type of product can be customized and sampled according to specific needs. |
Label paper type introduction:
1. Thin base paper type fragile paper adhesive surface material
Thin base paper type fragile paper self-adhesive surface material is suitable for printing and processing in the form of roll drum paper on label machines. Due to the low strength of the surface material, fragile paper is only printed and die cut without waste discharge; The finished product label is only sliced and not rewound. So fragile paper adhesive labels cannot be automatically labeled and are all manually labeled.
Thin base paper type fragile paper adhesive surface material should not be printed in single sheet form, because cutting the drum material will accelerate the shrinkage of the surface material, causing deformation of the base paper, forming gaps between the base paper and the surface material, and the adhesive liquid will overflow due to environmental factors, causing the surface material to break during printing processing, resulting in an increase in waste labels and increased losses. It is recommended to use resin ink letterpress printing and flexographic water-based ink printing for fragile paper materials in roll barrels.
2. Thick base paper type fragile paper adhesive surface material
The thickness of the base paper for fragile paper adhesive surface material with thick base paper is generally 120g-220g/square meter. Due to the thickness of the base paper, the shrinkage of the surface material will not cause deformation of the base paper, only the shrinkage around the surface material.
The fragile paper adhesive surface material with thick substrate can be cut into single sheets and printed in various forms such as offset printing, embossing, and screen printing. Manually dispose of waste or not dispose of waste after die-cutting.
Due to the easy shrinkage of the surface material of fragile paper adhesive labels, processors should print them immediately after purchasing the material and should not store them for a long time; When encountering surface material shrinkage and edge glue overflow during printing, the paper feeding speed should be slowed down appropriately to avoid excessive peeling force, which may cause material edge breakage and tearing.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-