Reddy

Product Introduction of Reddy RD8200G Pipeline Detector:
Product model: Reddy RD8200G
Product brand: Reddy
Product Category: Pipeline Detector
Product note: Pipeline detector

Reddy RD8200G Pipeline Detector Product Overview:
The all-new RD8200G can effectively solve these problems. This is the more advanced and powerful precision detector series from Reddy in the UK, designed with full consideration for the needs of operators.

Product features of the Reddi RD8200G pipeline detector:
Fast, accurate, and reliable performance
Easy to set up and use
Readable display screen under sunlight, high-performance audio system, and vibration alarm for noisy environments
Sensitive and accurate signal processing provides reliable results
Adapt to challenging environments
Very suitable for dense underground pipeline environments
Avoid strong interference signals
Identifying target cables in parallel with multiple cables
Technology driven better on-site practice
Help to use the positioning device correctly to improve detection efficiency
Monitor on-site operations through automatic use of recording function
Prove that your operations are different from those of competitors and add value to your customers
Ergonomic design, high quality
Sturdy, lightweight, and ergonomic
Designed and manufactured according to British standards
Self check to ensure trust in the measurement results of the locator

Advantages of the Reddy RD8200G Pipeline Detector System:
Fast, accurate, and reliable performance
Easy to operate and use - providing fast, accurate, and reliable measurements
Industrial grade display screen, suitable for outdoor use
The RD8200G receiver and transmitter use semi transparent and semi reflective low-power LCD technology, utilizing ambient light to improve screen readability under direct sunlight and extend battery life
TruDepth ensures the correctness of operations
Only when RD8200G is correctly aligned above the target, can Reddy's TruDepth display accurate depth and current measurements, and the consistency of the measurements makes you confident that you are operating along the correct route
High performance audio and vibration alarm, suitable for noisy environments
The RD8200G waterproof speaker casing has been optimized to provide optimal resonance for your selected high-frequency or low-frequency tones
5 power output audio levels and vibration alarms to help technicians work in challenging situations
Peak+mode improves speed and accuracy
The Peak+mode adds guidance or valley positioning advantages, improving the accuracy of the peak mode
Guidance allows you to quickly locate peak positions
The valley value allows you to check for distortion caused by other pipelines or interference
Passive line avoidance, used for fast area scanning
Before excavation, quickly inspect the area by synchronously detecting the passive power and infinite electrical signals of underground cables or pipelines
First class sensitivity, suitable for complex detection environments
Advanced digital signal processing technology enables operators to detect weak signals related to difficult to locate or deep pipelines and respond accordingly
iLOC, Realize efficient operation
The long-range wireless connection between the RD8200G receiver and compatible transmitter allows you to control the power and frequency of positioning signals up to 1400 feet/450 meters away.
Adapt to challenging environments
The RD8200G series receivers and transmitters simplify the task of partitioning and tracking underground pipelines near dense websites, substations, or high-voltage lines
Current direction, track the correct circuit
Identify the target line among multiple parallel lines by applying a dedicated CD signal from the Tx-10 transmitter. The CD arrow displayed on the receiver is used to confirm that you are tracking your target line.
Power Filters can work in places where other pipeline instruments cannot be used
When the transmitter cannot be connected, tracking a single wire in a dense website can indeed be challenging, as chaotic and powerful interference can cause confusion or suppression of specific signals.
A single button enables users to use the harmonic characteristics of the power frequency signal to determine whether the signal comes from one source or multiple cables, and then track and identify it.
Dynamic overload protection, rejecting unnecessary interference
Automatic interference filtering can be used in electrical noise environments near substations or overhead transmission lines.
4kHz positioning and CD optimized for telecommunications and street lighting
4kHz positioning frequency can track high impedance lines over longer distances. Combining 4kHz with CD can improve tracking accuracy in densely populated infrastructure areas.
SideStep interference avoidance
Adjust the positioning frequency to avoid interference prone frequencies, and it can also be used in areas where multiple detectors are working simultaneously

Product parameters of Reddy RD8200G pipeline detector:

Parameter requirements:
1. Sensitivity: 6E-15 Tesla, 5 μ A at 1 meter (33kHz)
2. Dynamic range: 140dB rms/√ Hz
3. Selectivity: 120dB/Hz
4. Depth measurement accuracy: ± 3%
5. Positioning accuracy: ± 5% of depth
6. Active positioning filter bandwidth: ± 3Hz, 0<1kHz; ± 10Hz, ≥ 1kHz
7. Startup time:<1 second
8. Maximum depth reading: pipeline is 30 meters, probe is 19.5 meters
9. Active positioning mode: five types (peak; peak+TM; directional; Wide peak value TM; valley value)
10. Gain control: Guided mode: automatic gain;
Other modes: Use "+" or "-" to manually adjust the gain and restore the center value (50% of full scale) with one click
11. Custom positioning frequency: 5 (up to 5 frequencies from 50Hz to 1kHz can be set at 1Hz resolution)
12. Active positioning frequency: 21 (ELF (98/128Hz), 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz),
920Hz, 940Hz, 1090Hz, 1450Hz，4096Hz, 8kHz, 8440Hz, 9820Hz, 33kHz, 65kHz, 82kHz, 83kHz, 131kHz 和 200 kHz）
13. Probe frequency: 4 (512Hz, 640Hz, 8kHz, and 33kHz)
14. Fault finding: 8KFF and CDFF (optional accessories A-frame and compatible transmitter). Insulate the protective sheath on the pipeline and cable
Fault location to 10cm/4 "accuracy
15. Passive positioning modes: 5 (power supply, radio, CPS cathodic protection system, Cable TV)
Passive line avoidance - power and wireless synchronous positioning
16. Volume: Adjustable in 5 levels, making it easy for operators to hear alarms clearly in noisy environments
17. Tactile vibration: Handle vibrations when StrikeAlert, swing, and overload warnings are activated.
18. Swing warning: When the user excessively swings the locator, it will emit sound and visual warnings.
19. Synchronize depth and current reading: Simultaneously display pipeline depth and positioning signal current
20. Detection measurement values: Store up to 1000 detection points in the locator and use Bluetooth ® Attached is an internal GPS (if applicable)
Equipped with GPS data from external GNSS sources, export data immediately or in bulk via Bluetooth
21. Dynamic overload protection: 40dB (automatic)
22. Battery: Receiver: Receiver (including built-in lithium battery), transmitter: Transmitter (including built-in lithium battery)
23. Battery running time (continuous): 35 hours for lithium-ion battery pack; 2 alkaline D-type batteries for 13 hours
24. Operating temperature: -20 to 50 ° C
25. Storage temperature: -20 to 70 ° C
26. Shipping dimensions: 700mm x 260mm x 330mm
27. Quality certification: Passed ISO 9001:2015
Standard configuration: 1 receiver, 1 transmitter, 1 dedicated PL ring, 1 RB wire (customized), 1 YB wire (customized), 1 grounding pin, 1 magnet, 1 user manual, and 1 instrument package.