Quotation for high concentration online acid-base concentration meterTechnical Parameter

b) Conductivity: 0~50; 0~200； 0~500； 0~1000； 0~2000 （mS/cm）

c) Temperature: 0-60 ℃

Quotation for high concentration online acid-base concentration meterThe concentration of a solution is indirectly measured by measuring its conductivity. It is known that at a constant temperature, the conductivity of a low concentration electrolyte corresponds to the concentration of the solution. When the concentration remains constant and the temperature of the solution changes, the conductivity also changes, that is, the concentration of the solution is a function of conductivity and temperature.

Installation precautions
1. Secondary watches generally do not require daily maintenance. In case of obvious malfunctions, it is generally not advisable to open and repair them on your own. Please contact us promptly.
2. The conductivity cell needs to be cleaned of dirt in a timely manner. Clean with 50% warm detergent (for strongly adhesive dirt, soak in 2% alkaline solution), brush with a nylon brush, and rinse the inner and outer surfaces of the electrode repeatedly with distilled water. Remember to touch the electrode with your hands.
3. After starting the power supply, the instrument should display. If there is no display or the display is abnormal, the power should be turned off immediately, and the power supply and fuse should be checked for normal operation.
4. The lead wires of the electrode and the connecting plug at the back of the secondary meter should not get wet, otherwise the measurement will be inaccurate.
5. Incorrect use of electrodes often leads to abnormal operation of the instrument. When installing electrodes, they should be completely immersed in the solution.