instant adhesiveAlso known as shadowless glue/crystal glue, it is a high-strength, fast curing adhesive that can be used for bonding between various materials, especially suitable for use in the woodworking industry For tight fitting, non porous materials such as rubber, metal, plastic, and quick drying glue, also known as shadowless glue/UV glue/crystal glue/UV shadowless glue, which means quickly adding glue, single component, light curing, it is an essential consumable for making crystal images. Strong adhesive force, low viscosity, high strength, large-area bonding without bubbles, easy to clean, meets bonding requirements.

Quick drying adhesive appearance: colorless, low odor, low anti-corrosion, transparent viscous liquid, no mechanical impurities. Highly transparent, highly translucent, with minimal shrinkage of the adhesive layer, and will not turn yellow for a long time in a humid environment after curing. Fast curing speed, positioning in seconds, reaching ultra-high strength in minutes, greatly improving work efficiency. Our company's 502 is a single component, solvent-free, and does not require the addition of contact, heating, or pressure adhesives With just a thin layer of glue, it can utilize the atmospheric humidity in the air to generate high polymerization.

Usage:

1. Clean the surface first to remove dust, oil stains, embroidery, etc. When bonding metal, grind it rough first. For plastics such as PE, PP, or PTEE, activate the surface first.

2. Open the front cover and lightly tap the top part with your fingers to leave no residual liquid, then use scissors to cut out the hole.

3. Drop a small droplet of adhesive on the surface to be bonded, immediately proceed with bonding, and maintain it until it hardens. The bonding area should not be too large, and the thickness of the bonding layer should not exceed 0.2mm.

4. Wipe the container after use, cover the lid, and store in a cool, dry place or refrigerated.