Qingyuan Handheld Electric Baler Plastic Steel Strapping MachineInquiry: Liang S

Performance characteristics of the JD-13/16 handheld electric baler from the Robopak brand:

1. The plastic steel strip buckle free packaging tool is suitable for flat packaging, such as pallets, boxes, and other similar packaging forms;

2. Both regular and high tensile plastic steel strips and PP strips can be used

3. As it is a buckle free connection, there is no need to use steel buckles separately;

4. The adhesive strength of the buckle free connection is about 75% of the strength of the plastic steel strip (depending on the quality of the plastic steel strip), and can save about 10% of the overall packaging cost;

5. A universal plastic steel strapping tool used in almost all fields, reliable in use, sturdy in design, easy to operate, and relatively lightweight;

6. Widely used in various places, it is an indispensable assistant for every packaging occasion.

Technical specifications of the JD-13/16 handheld electric strapping machine from the Robopak brand:

Packing belt width: 13-16mm

Packing tape thickness: 0.4-1.2m

Packing tape strength: about 75%;

Stretching force: adjustable within 60-2800N (depending on mass);

Tightening speed: 100-200m/s

Body weight: 2.7kg;

Length, width, and height: 325 * 130 * 140mm (according to actual dimensions).

The usage process of portable rechargeable packaging machine:

① Wearing straps (correctly inserting the strapping into the strapping machine), tightening (tightening by rotating the tightening wheel counterclockwise), fastening (high temperature generated by high-frequency vibration of the upper and lower friction plates causing the straps to stick together), breaking straps (cutting off the upper strapping);

② : Load the charged battery into the packaging machine, wrap the PP or PET tape around the packaging material from top to bottom, and hold the packaging tape with your left hand so that the end of the lower packaging tape is about 20cm away from your hand

③ Hold the tool with your right hand and tighten the strap control lever, fully insert the strapping into the tool body, with the head of the strapping approximately 5cm above the tool body, and then release the strap control lever;

④ Press the tightening button to start tightening the strapping until the necessary or preset tightening force is reached; The tightening force of the packing belt can be adjusted on the operation panel; The strapping can be re tightened at any time;

⑤ Press the fusion cutting button to start the friction fusion action, and the upper packing belt will be automatically cut off after the fusion is completed; The LED indicator will also indicate the welding cooling time; After completing the friction, the green LED flashes for about two seconds. During this time, do not move or remove the tool; The LED indicator light is continuously on and emits a "wow" business sound signal, indicating that the friction action has been completed; If the bundling tape has not been welded or there is an alarm sound, it indicates that the tightening force has not reached the minimum and needs to be re tightened;

⑥ After the LED stops flashing and emits a "whoosh" sound signal, pull up the control lever to bring it in; Rotate the tool to the right to detach it from the packing belt; Check the friction fusion surface on the packing belt;

Qingyuan Handheld Electric Baler Plastic Steel Strapping Machine