switch power supply

Note: 1. The above parameter testing conditions are: 230V input, rated load, 25 ℃ 70% RH, temperature.
2. Tolerance: including set tolerance, line stability, and load stability (Note 5).
3. Ripple test: Use A12 "twisted pair for 20MHz and short-circuit with 0.1uF&47uF capacitors for interruption.
4. Incoming voltage stability test: The lowest voltage to the highest voltage of the incoming line at full load.
5. Load stability test: Load ranges from 0% to 100%.
6. Each output can reach the maximum current, but the total load cannot exceed the output power.