VIP member
Pure water hydrogen generator CQ-800
Pure water hydrogen generator CQ-800
Product details
Product Introduction:
detailed description
“CQ”Series pure water hydrogen generator, eliminating alkali addition. It has a small volume and light weight
Characteristics such as high conversion efficiency and sufficient gas production,It is an ideal upgrade to replace hydrogen gas cylinders
Replacement products.
1、 Installation and use of instruments
1Remove the instrument from the packaging box, check for any damage caused by improper transportation, and verify the instrument
Are the spare parts, certificates of conformity, and warranty cards complete.
2Connect the instrument gas pipeline to ensure that the joint does not leak air.
3Open the water bucket cover of the instrument, add pure water and deionized water, and do not exceed the observed water level line,
Do not lower the lower limit water level line and tighten the upper cover.
4Connect the power supply, turn on the power switch, the red light of the power switch will light up, and the green light of the gas production light will light up. transport
The output flow rate is displayed on the LCD screen, with a displayed number of,
200、300、800The pressure gauge pointer is composed of0Mparise to0.4MpaThe instrument can be used normally.
5The instrument comes with a set of drying tubes. Pay attention to the silicone gel in the drying tube during use
No discoloration, if the discolored part exceeds one part of the entire part
Change the color changing silicone gel in a timely manner. When replacing, it should be done under no pressure and opened for drying
Cover the top of the tube, remove the inner tube and invert the discolored part
Add new color changing silicone or regenerated silicone. Then place the inner tube into the drying tube to confirm
Place it properly, tighten the upper cover, and ensure that there is no air leakage.
6After using the instrument for a period of time, the pure water in the bucket will decrease and become turbid. It should be added in a timely manner
Replace with pure water. Suggestion:3-6Inside the bucket of monthsDrain all the water, clean the bucket and add new water.
When transporting the instrument, drain the water from the bucket,Water release method: Use the drain silicone tube behind the instrument to release water
Pull it out and remove the nylon plug.
2、 Working principle
CQThe series hydrogen generator electrolytic cell adopts the most advanced solid polymer electrolyte in the world today
Decomposition hydrogen production technology, which reduces the oxygen content of the produced hydrogen gasa surname0.1ppmIt uses pure water as the electrolyte,
Using titanium metal as electrodes. After being powered on, the cathode produces hydrogen gas and the anode produces oxygen gas. Oxygen venting, hydrogen gas
advanceAfter entering the air-water separator, it is separated from water and thoroughly dried through a drying tube before being discharged from the air outlet. stem or root of plants
The instrument adopts high sensitivity and fuzzy automatic trackingControl system, ready to use and produce, using gas to produce gas,
No gas is needed, no gas is produced, achieving automatic constant pressure and constant current, making the pressure stability accuracy range less than0.001
MpaEnsure high purity and pressure of hydrogen gas output from the instrument Stable, safe, and sustainable.
3、 Main technical parameters
1Hydrogen purity:99.999%
2Hydrogen flow rate:0-200ml/min 0-300ml/min 0-800ml/min
3Output pressure:0.4MPa
4Available pure water: greater than2MDeionized water or secondary distilled water
5Pressure stability:<0.001Mpa
6Power supply:220V±10% 50Hz
7Power consumption: 120W 150W 200W
8External dimensions:350m×220mm×340mm
9Net weight:10kg 12kg 15kg
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-