Product Introduction

Henan Fukai Mechanical Pure Water Bucket Crusher is a device used for crushing and regenerating waste plastic buckets. The machine is used in various PC/PET plastic buckets generated or collected by blow molding plastic bucket processing units, waste plastic recycling units, and pure water filling units. The machine can be used for one-time crushing and molding of the entire mineral water bucket. After crushing, the particles have the advantages of uniform size and high utilization. It can also be used for crushing and regenerating various waste plastics such as chemical blue buckets, oil pots, plastic buckets, laundry detergent buckets, etc. In terms of product application prospects, according to relevant statistics, pure water buckets are usually phased out after about 60 cycles of turnover, and the actual usage frequency may be relatively lower for turnover transportation, storage, and other situations. Under the influence of industry background, crushing the large amount of waste buckets generated can effectively accelerate the efficiency of resource regeneration and recycling.

Technical Parameter

model	FK230DF	FK300DF	FK400DF	FK600DF	FK700DF	FK800DF	FK1000DF	FK1200DF	FK1400DF	FK1600DF
	heavy	heavy	heavy	heavy	heavy	heavy	heavy	heavy	heavy	heavy
	light	light	light	light	light	light	light	light	light	light
Power (KW)	4	5.5	11	22	30	30	37	55/75	90/110	110/132
			7.5	15	22	22	30	45	75	90
Production capacity (KG)	80-200	100-260	300-500	600-1000	800-1200	900-1600	1200-1800	1600-2500	3000-5000	3800-6500
			200-400	400-800	600-1000	800-1200	1000-15000	1500-2000	2000-3400	3000-6000
Blade Material	9CRSI SKD11 6CrW2Si T10 tungsten steel edge setting
Broken diameter (mm)	250*260	320*280	420*420	620*450	720*580	820*580	1020*630	1220*700	1420*750	1620*800
			420*380	620*420	720*480	820*480	1020*560	1220*560	1420*650	1620*680
Mesh (MM)	Optional for sizes greater than 1mm
Weight (KG)	260	320	630	1280	1630	2060	2750	3570	5680	8600
			480	960	1150	1400	1820	2260	3850	5400
The above parameters are for reference only, please refer to the actual situation.

Structural principle

The pure water bucket crusher adopts a shear type crushing structure in terms of structural principle. The equipment usually consists of a frame, rotor, screen, blades, and other parts. During operation, the material enters the crusher main box through the feeder. In the main box, the material is repeatedly sheared by the moving and fixed blades under the rotation of the rotor. The sheared material is discharged from the box under the filtering effect of the bottom screen. The material that does not meet the discharge size is crushed again in the main box until it reaches the size of the screen aperture before being discharged from the box to complete crushing. The equipment structure diagram is as follows:

Further reading

Generally, for bucket water buckets, plastic materials are mainly classified into two types: PET and PC. Understanding these two materials can effectively provide you with effective profit margins for purchasing pure water buckets for crushing and recycling. Henan Fukai Machinery will provide you with a detailed introduction on the performance differences between the two materials through the following content. Firstly, let's talk about PC mineral water buckets. PC stands for polycarbonate, which is also known as PC engineering plastic. PC is an amorphous thermoplastic resin with excellent comprehensive performance, including excellent electrical insulation, elongation, dimensional stability, chemical corrosion resistance, high strength, heat resistance, and cold resistance; It also has the advantages of self extinguishing, flame retardant, non-toxic, and colorable. The material of the PC bucket is relatively hard. High melting point, high temperature resistance, the melting point of PC barrel is 280 degrees. Under normal circumstances, if the temperature does not exceed 180 degrees, there will be no qualitative change to the barrel. The temperature of boiling water is usually around 100 degrees, so PC buckets can directly hold boiling water without any changes, making them a relatively high-quality material. Compared to PET materials, their crushing material prices are slightly higher. For PET barrels, PET is a milky white or light yellow, highly crystalline polymer with a smooth and glossy surface. The PET bucket material is relatively soft and has high transparency. PET buckets have been exposed on television for drinking water safety issues. The probability of cancer caused by long-term consumption of PET bottled water is 27% higher than the normal probability. The National Quality Supervision Administration of China has also banned the use of PET material in water buckets. PET is not heat-resistant. When the material is exposed to high temperatures or open water, it will decompose and produce harmful toxins. PET material is used in water buckets and can be applied to unheated beverage bottles, with a relatively lower price for crushed materials. In the identification of two materials, we can usually compare and distinguish them based on factors such as color, softness, and knocking sound. Usually, there are relevant name markings at the bottom of the two types of barrels, which can be distinguished by inspection.