VIP member
Purchase/wholesale price of microwave ceramic drying and shaping equipment
Honeycomb ceramics have broad application prospects and are widely used in the chemical industry due to their high mechanical strength, easy regenerat
Product details
Product Introduction
Honeycomb ceramics have broad application prospects and are widely used in the chemical industry due to their high mechanical strength, easy regeneration, good chemical stability, good heat resistance, and uniform pore distribution. Environmental protection, energy, metallurgy, electronics, petroleum, smelting, textiles, pharmaceuticals, food machinery, cement and other fields. As sensitive components of sound-absorbing materials and materials such as artificial bones and tooth roots, they are also receiving increasing attention from people. Due to the high moisture content and numerous pores during the molding process of porous materials, as well as the particularly thin pore walls inside the body, traditional methods are extremely difficult to dry due to uneven heating. In addition, these porous materials have poor thermal conductivity, and their drying process requirements are particularly strict, especially for honeycomb ceramics used in environmentally friendly automobiles. Poor control of the drying process can lead to deformation and affect porosity and specific surface area.
Microwave drying technology has been successfully applied to the drying of porous ceramics, which can easily reduce the moisture content of the body from 18% to 25% to below 3%, with a precipitation rate of 0.7 to 1.5 kg, greatly shortening the drying time and improving the yield of finished products. We also applied microwave drying to the warm drying of split bricks, and the effect was very significant.
Microwave ceramic drying and shaping equipmentThe advantages include:
1. The quality of product drying and shaping is good, without cracking.
2. Easy to control, convenient and flexible to operate. Automatic control of heating time and drying temperature
3. Save time and achieve high output.
4. Low energy consumption.
5. Low production intensity and minimal land occupation.
6. Effort saving, process saving, especially easy to connect with the front and rear processes in an automatic line, reducing the number of handling times.
7. Environmentally friendly, clean and hygienic. No pollution, let alone the problem of "three wastes".
Microwave drying technology has been successfully applied to the drying of porous ceramics, which can easily reduce the moisture content of the body from 18% to 25% to below 3%, with a precipitation rate of 0.7 to 1.5 kg, greatly shortening the drying time and improving the yield of finished products. We also applied microwave drying to the warm drying of split bricks, and the effect was very significant.
Microwave ceramic drying and shaping equipmentThe advantages include:
1. The quality of product drying and shaping is good, without cracking.
2. Easy to control, convenient and flexible to operate. Automatic control of heating time and drying temperature
3. Save time and achieve high output.
4. Low energy consumption.
5. Low production intensity and minimal land occupation.
6. Effort saving, process saving, especially easy to connect with the front and rear processes in an automatic line, reducing the number of handling times.
7. Environmentally friendly, clean and hygienic. No pollution, let alone the problem of "three wastes".
Specification parameters
ceramicsMicrowave drying equipmentParameters:
Equipment model: ZY-60HM
Power input: three-phase 380 ± 10% 50Hz;
Output microwave power: 90KW (power adjustable)
Microwave frequency: 2450MHz ± 50MHz
Dehydration efficiency: about 60 kg/hour
Equipment (length x width x height): 14700 x 1265 x 1700mm
Microwave leakage: in accordance with the national GB10436-89 standard ≤ 5mw/cm2
Compliant with GB5226 Electrical Safety Standard
Equipment model: ZY-60HM
Power input: three-phase 380 ± 10% 50Hz;
Output microwave power: 90KW (power adjustable)
Microwave frequency: 2450MHz ± 50MHz
Dehydration efficiency: about 60 kg/hour
Equipment (length x width x height): 14700 x 1265 x 1700mm
Microwave leakage: in accordance with the national GB10436-89 standard ≤ 5mw/cm2
Compliant with GB5226 Electrical Safety Standard
application area
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-