Programmable high and low temperature test chamber, constant temperature and humidity test chamber-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18958207418
Address

No. 9 Houtan Road, Shangtian Town, Fenghua City, Ningbo City, Zhejiang Province

Contact Now

Programmable high and low temperature test chamber, constant temperature and humidity test chamber

GDW High and Low Temperature Series Introduction: This test chamber is suitable for conducting high temperature, low temperature, high and low tempera

Contact Supplier

More Products

Product details

GDWHigh and Low Temperature SeriesIntroduction: This test chamber is suitable for high temperature, low temperature, high and low temperature cycling and temperature screening of products (whole machine), components, and materials（ESS）Experiment. This test chamber can be used for testing both heat dissipation test samples and non heat dissipation test samples. For the heat dissipation test sample, its heat dissipation power cannot exceed the cooling capacity of the test chamber, as the cooling capacity is a dynamic value that varies with temperature points.

SDGDWseriesTechnical Parameter

model			GDW-100C				GDW-500C				GDW-010C
Performance parameters	temperature range		-70～＋150℃
	temperature fluctuation		≤±0.5℃
	temperature uniformity		≤2℃
	Temperature deviation		±2℃
	Heating rate (-55 ℃ →+85 ℃ overall average)		≥2℃/min（				≥2℃/min
	Cooling rate+85 ℃ → -55 ℃ overall average)		≥0.7～1℃/min				≥0.7～1℃/min
Structure	casing		Cold rolled steel plate surface spray coating (ivory white)
	Liner		Stainless steel plate
	Thermal insulation material		100mm non hazardous waste environmentally friendly glass fiber insulation layer
refrigeration system	Cooling method		Air cooled or water-cooled
	refrigeration machine		Imported compressor
Heating power W			3000			4000		6000
Observation window (mm)			300 × 400 (width × height)	400 × 500 (width × height)
Test hole (mm)			1 on each side with a diameter of 100
temperature sensor			Armored platinum resistor
controller			7-inch touch screen program controller
Data Storage and Interface			USBdata interfaceThe device is equipped with a USB storage interface, which stores information including main operating parameters such as test time, test target values, and test measured values TCP/IPcommunication interfaceThe test chamber is equipped with an SRS485 data interface. If you purchase the communication function of the upper computer in the later stage
Internal dimensions (mm)		D	450	700					1000
		W	450	800					1000
		H	500	900					1000
Motor cover height (mm)			200	240
power supply			AC380V 50Hz three-phase four wire system+grounding wire, protective grounding resistance less than 4 Ω
Maximum total power W			6000		7000					15000
Security protection			1. Phase sequence protection 2. Overcurrent protection 3. Compressor overvoltage protection 4. Leakage protection 5. Over temperature protection
Standard configuration			1 copy of product user manual, 1 copy of test report, 1 copy of certificate of conformity and quality assurance certificate, 2 shelves and 4 shelves. Equipped with mobile casters.
Meet standards			GB/T2423.1、GB/T2423.2、GJB150.3、 GJB150.4

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content