VIP member
PrepBM-01C high-energy ball mill
Multiple grinding tanks are available for selection, with infinitely adjustable rotational speed. Suitable for both dry and wet methods, suitable for
Product details
The PrepBM-01C high-energy ball mill is mainly used for the grinding and preparation of laboratory samples. It can perform fast and lossless fine grinding and is suitable for hard, brittle, and fibrous materials. After grinding, the sample particle size uniformity is good, which can well meet the requirements of various analyses for sample particle size and uniformity.
advantage
Multiple grinding tanks are available for selection, with infinitely adjustable rotational speed.
Suitable for both dry and wet methods, suitable for solid particles, suspensions, and pastes of various sizes and materials.
The minimum particle size can reach 0.1 μ m.
The safety locking design of the protective door prevents accidental operation.
The tank is securely clamped to prevent the grinding ball and the grinding tank from rotating in the same direction.
The grinding tank is equipped with an O-ring seal, which can effectively seal and prevent dust.
The grinding tank safety locking device (three-point fixation), built-in safety positioning system (conical bottom center positioning), and three thickened metal fixing devices around it can ensure complete fixation and effectively prevent the grinding tank from loosening or sliding during the grinding process.
The grinding tank and lid are equipped with gripping edges for easy operation; There is a gap between the edges of the can and lid for easy opening.
The PTM system for temperature and pressure monitoring (optional) can monitor and analyze changes (chemical reactions, phase changes, etc.) that occur in the tank during the grinding process in real-time online.
Technical Parameter
| model | PrepBM-01C |
| Sun gear speed | 30-450rpm, effective sun gear diameter: 360mm |
| Rotational speed ratio | 1: -2.2 (can be set according to requirements) |
| Feed material | Soft, hard, brittle——Dry or wet |
| Feed particle size | ＜12mm |
| Discharge size | Minimum achievable0.1μm(Depending on the material properties) |
| Grinding tank and grinding ball material | Standard stainless steel, other materials available: alloy steel, carbide agate, corundum, zirconia, nylon, poly (tetra) Fluorine ethylene, polyurethane, chromium steel, etc |
| Number of grinding platforms | 4/2 Can grind 2, 4, or 8 samples simultaneously |
| Grinding tank size | According to the grinding material, multiple sizes are available for selection and customization |
| Grinding tank capacity | 50mL, 80mL, 125mL, 250mL, 500mL |
| Electrical conditions | AC 220V±10% Single phase, 50/60Hz, 1.5kW |
| size | 550×360×450mm |
| net weight | 150kg |
application area
GeologymineProduction, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, beauty, environmental protection, research institutes and other departments, such as electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganese oxide, catalysts, fluorescent powders, long afterglow luminescent powders, rare earth polishing powders, electronic glass powders, fuel cells, ceramic capacitors, zinc oxide varistors, piezoelectric ceramics, nanomaterials, circular ceramic capacitors MLCC、 The production fields and industries of thermistors (PTC, NTC), ZnO varistors, lightning arrester valve plates, strontium titanate ring varistors, ceramic filters, dielectric ceramics, piezoelectric transducers, piezoelectric transformers, chip resistors, thick film circuits, potentiometers, alumina ceramics, zirconia ceramics, phosphors, zinc oxide powder, cobalt oxide powder, Ni Zn ferrite, Mn Zn ferrite and other products.
If you need to know the specific content of this product, obtain more information and professional support, please call or email directly to:info@ruishenbao.com.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-