Product Name: Precision Millet Seed planter |
| |
|
| |
| Product Introduction |
|
The main technical parameters of the millet seeder are: 1. Dimensions (length * width * height) with variable speed seeder: 277 * 274 * 260cm
2. Number of rows of seeders: single row of corn
3. Seed planter type: Corn single row
4. It can also be customized according to needs
5. Suitable sowing speed: less than 5 kilometers per hour
6. Seed breakage rate: less than 2.5%
1. The seeder has low resistance, flexible rotation, simple structure, easy maintenance, and durability. 2. The shell of the seed planter and the seed guide wheel are made of die cast aluminum, which has high strength and light weight. The end cover is made of transparent high-strength material, and users can clearly see the working condition of the spoon wheel through the transparent cover. 3. The seed planter is in the corn sowing state when it leaves the factory. Users can purchase corresponding accessories according to their own needs to sow crops such as soybeans and sorghum. 4. The seed planter does not have a seed cleaning device and relies on the self weight of the seeds to clean them. The seed coating rate is also very low, and it has the characteristics of few holes, uniform seeding, and low seeding points. 5. The seeder is a six to eight speed spoon wheel seeder with a gearbox. 6. A micro adjustment device is added on the outside of the seeder to reduce the leakage rate and replay rate of the seeder, and increase the single seed rate
3、 Installation method of brush:
1. The brush is installed on the inner side of the transparent cover, and the groove on the brush matches the protrusion on the end cover.
2. Tighten the screws on the outside of the transparent cover
4、 Adjustment of seed planter handball:
Pull out the handball and slide it up and down to adjust the height of the seed inlet on the partition. The specific operation is as follows:
When the seed size is small, adjust the handball towards the direction marked with "small" on the end cap,
When the seed size is large, adjust the handball towards the direction marked with the word "large" on the end cap.
5、 Adjustment of plant spacing:
1. A spoon wheel seeder with a gearbox, which can adjust six plant spacing by moving the gear lever. The plant spacing gradually increases from 1st gear to 6th gear, and the seeder does not work when in neutral position and is in a clutch state,
6、 Oil filling method for seeders with gearbox:
1. Remove the dust cover labeled with numbers on the transmission cover,
2. Add an appropriate amount of butter or engine oil to the gears and shafts inside the gearbox
3. Install the dust cover.
|
| |
|
|
|
| |
| |
