1、 Purpose:

Portable ozone analyzerMainly used for ozone detection in water from large and small water plants, beverage plants, and purified water plants. Our technical personnel have found through extensive research that ozone detection in water can be carried out using DPD chemical colorimetric method or titration method. This instrument adopts chemical colorimetric method,Easy to operate,Easy to use, it is an ideal instrument for detecting ozone in water from various water plants, so that they can control water quality to meet the national water quality standards.

2、 Principle:

This instrument applies the principle of microcomputer photoelectrochemical colorimetric detection to replace the traditional titration method, eliminating the need for tedious manual operation and calculation, greatly saving manpower and time;meanwhileThe standard reagents make it easy for ordinary laboratory technicians to operate, greatly eliminating human errors, thus greatly improving measurement resolution,The numerical display of the measurement results is more accurate.

3、 Product model:

The blue model is CY-1A (digital display low range 0-3): 2580 yuan

The blue model is CY-1A (customized high range 0-12): 3200 yuan

★The black model is CY-2A (DPD waterproof low range 0-3): 3000 yuan

5、 Technical parameters:

Measurement range: 0-3.0-12mg/L

Minimum indication: 0.001mg/L

Repeatability: ≤ 2%

Indication error: ≤ ±5%FS

Power supply voltage: DC 9V

5、 Product features:
1.Microcomputer, touch sensitive keyboard, clear display of LCD numbers, easy to use.
2.Using the microcomputer photoelectric colorimetric principle of spectrophotometry, Convenient to use reagents, the water sample can be read and the measured value can be displayed digitally after being placed in the reagent for reaction.
3.Our company's specially designed LED light source automatic control circuit ensures stable light source and solves the problem of preheating during startup. Its light source has a lifespan of up to 20 years and can be used directly without preheating when turned on.

4.The host is equipped with a high-power lithium batteryPower adapterPlastic waterproof box, suitable for quantitative measurement in laboratories or field sites, can be used continuously for 4 hours, can be charged and used immediately, and can be used for both AC and DC.

5.The instrument stores calibration curves over the full range It has power-off protection and calibration data will not be lost. Automatic zeroing and5Automatic point calibration, data has non-linear processing and data smoothing functions, and the minimum reading of the instrument is 0.001mg/L.

6. Advanced technology, in compliance with the national standard GB5749-2006 for drinking water hygiene.