BX-800 series portable microscope
1、 The purpose of the instrument:
BX-800 series portable on-sitemetallographic microscopeIt is a microscope mainly suitable for metallographic examination and failure analysis of various large workpieces on site. It does not require cutting or sampling, but directly grinds and polishes the workpiece to ensure its integrity. The microscope base is equipped with a strong magnetic suction seat, which can be directly attached to the workpiece to observe its metallographic structure and perform on-site metallographic inspection. On site metallographic microscopes are mainly used in aviation manufacturing, mechanical manufacturing, vehicle manufacturing, boiler and pressure vessel manufacturing and inspection. They can also be applied in industries such as petrochemicals, railways, shipbuilding, power plants, power stations, equipment installation, safety inspection of large molds, quality supervision, and physical and chemical laboratories. The instrument is widely used in factories and laboratories for casting quality identification, raw material inspection, or research and analysis of metallographic structure after material treatment.
2、 Instrument features:
The microscope base is equipped with high magnetic two-wire feet that can be switched on and off, which can firmly adhere to the workpiece and adapt to various diameters of pipes and planes. The field of view can be adjusted in the X-Y plane.
Equipped with a microscope lens and camera connected to a metallographic microscope, it can directly take photos on site.
The microscope adopts a large field eyepiece and a flat field achromatic objective lens, with adjustable brightness, a fine adjustment mechanism, stable focus, and clear imaging. Equipped with a spotlight halogen light source, the field of view is uniform and flat.

3、 Technical parameters
1. Eyepiece

2. Objective lens

3. Optical magnification: 100X-500X

4. Converter: Three hole converter, horizontal camera output port
4. Focusing mechanism: coarse and fine adjustment focusing
5. Lighting device: Non spherical spotlight, rechargeable battery: 6V/20W, can work continuously for 2 hours on a single charge
6. Electromagnetic base: suction force of 25N/cm2, equipped with magnetic switch
7. Packaging box: Portable aluminum alloy carrying case (475 × 280 × 160mm)
8. Unique anti mold system
4、 Extended imaging system
Computer type (BX-800C): 1. Microscope 2. Adaptor 3. Camera (CCD+image acquisition card/CMOS) 4. Computer (optional)
Digital camera type (BX-800E): 1. Microscope 2. Adaptor lens 3. Digital camera
5、 Optional parts
1. Professional measurement and counting software
2. Metallographic structure chart analysis and rating software
3. Computer