AP-7000 can detect pH, ORP, optical DO, conductivity, temperature, etc, TDS， Salinity, turbidity, depth, seawater gravity (density), and water resistance. The IP68 rated probe is made of high salinity resistant aluminum and is used in freshwater, seawater, and wastewater applications.

lStandard configuration:

A 3-meter cable, display data, storage and GPS integrated display GPS Aquameter, USB interface, a complete set of accessories and a portable case suitable for outdoor use; Self cleaning system: Clean each sensor installed on the probe, including pH and conductivity. Equipped with a wiper arm for quick and easy replacement of cleaning brushes.

lOptional:

There are six interfaces on the probe, each of which can be equipped with an optical electrode or ISE electrode. ISE Electrode: ammonia nitrogen/ammonia; Chloride; nitrides; Fluoride; Calcium. Optical electrode: turbidity; chlorophyll; Blue-green algae; Fluorescent yellow; Refined oil; CDOM colored soluble organic matter; FDOM fluorescence dissolves organic matter; Ruodanming.

Aqualoggers perform short - to medium-term unmanned monitoring of data loggers.

AP-7000 is used in conjunction with GPS Aquameter for data storage, real-time reading, and calibration; You can also use the AP-7000 SDI probe for online monitoring without GPS Aquameter, with outputs of SDI-12 and Modbus SDI-12 and Modbus outputs.

lAP-7000 parameters:

**Can operate at a depth of 100 metersOne week,30 meters can operate for a long time.

You can directly connect your PC and probe through the USB interface of Aquaprobe PC KIT. By using the provided software, you can obtain real-time readings, record data directly into your hard drive, calibrate the probe, and complete the calibration report.


lOptional probe recorder and water quality parameters

Attachment download: