VIP member
Polymer cement (JS) waterproof coating
JS composite waterproof coating is a green and environmentally friendly waterproof coating, which is recommended by the country as a waterproof coatin
Product details
JS composite waterproof coating is a green and environmentally friendly waterproof coating, which is recommended by the country as a waterproof coating for residential buildings.
This material is a two-component waterproof coating composed of organic liquid material and inorganic powder material, which has the dual characteristics of high elasticity of organic materials and good durability of inorganic materials. After coating, it can form a high-strength and tough waterproof coating.
1. Can be directly applied on damp or dry substrates of various materials without flowing;
2. The coating has strong toughness, water resistance, weather resistance, and excellent durability:
3. Pigments can be added to form a colored coating;
4. Water based residue, non-toxic, odorless, pollution-free, and environmentally friendly;
5. Simple construction, short construction period, can be carried out on damp substrates, strong bonding strength;
6. The coating has a certain degree of breathability, and even if the base layer is wet, there will be no bulging of the water layer.
Base treatment
The surface of the base layer should be flat, solid, free of sharp objects, floating dust, visible water, and oil stains, and cleaned thoroughly;
The internal and external corners, as well as the pipe root 3, are all made into circular arcs. The radius of the internal corner is greater than 25mm for the construction of the large waterproof layer, and the radius of the external corner is greater than 5mm;
Uneven and cracked areas must be leveled first, and leaking areas must be sealed first.
ingredient
If water needs to be added, first add water to the liquid material and slowly add the powder material while stirring with a mixer. Stir for 5 minutes and mix evenly until there are no lumps in the material. The prepared material should be used up within 2 hours, otherwise the viscosity will increase and affect the construction.
The weight ratio method of the coating is based on the proportion indicated on the product packaging, and the amount of water added can be adjusted accordingly to adjust the viscosity of the coating and meet the construction needs of different parts of the facade and plane.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-