What is a pneumatic robotic arm?

Pneumatic robotic arm for automotive parts handling is a new type of auxiliary equipment for material handling and installation. It cleverly applies the principle of force balance, allowing the operator to push and pull heavy objects accordingly, so that the moving and positioned heavy objects form a floating state during lifting, sinking or airdropping, and the gas path can ensure the actual situation of zero force. Due to the processing technology and design cost control, the operating force is less than 3kg, which is affected by the weight of the workpiece. There is no need for skilled point operators to manually push and pull heavy objects, so that they can be placed correctly in any position in the space. But what wiring techniques are more helpful for its operation?

How to connectpneumatic manipulator？

1. Adopting the form of a drag chain: Usually, ordinary lines are installed inside the drag chain and this wiring is more commonly used in general three-axis linkage mechanisms as the executing components translate.

2. Snake skin pipeline: The principle that must be followed is that the execution part will not cause snake skin pipe entanglement, and special attention should be paid not to let the inner line bend and cause road breakage;

3pneumatic manipulatorThe method is to align the flexible wire with the wire: for example, we use a flip phone: the principle is to calculate the stroke and bending radius of the flexible wire.

4. If the circuit requires the use of electric brushes, the actuator of the robotic arm rotates more than 360 degrees or continuously rotates.

What are the steps to use a pneumatic robotic arm?

Users should carefully check the device before use to ensure that there are no problems before turning it on. During the use process, they should follow the manufacturer's instructions carefully. If there are any problems, they should stop and find the cause before continuing the operation.