This item isWhole pig grooming machine150 typeThe machine has the characteristics of open space, can enter pigs of different sizes, simple operation, high production efficiency, and strong safety factor. It is a series of supporting equipment for slaughtering, bloodletting, skinning, chest opening, etc. It is the main supporting slaughtering equipment for the production line of small and medium-sized slaughterhouses, mainly used for the hair throwing station after pig body slaughtering and scalding.

After years of practical experience and continuous improvement and innovation, our company has significantly reduced the labor intensity of workers with a hair removal rate of over 95%, while maintaining the integrity of pig carcasses and avoiding damage to pig skin. The machine has a simplified structure, low noise, and greatly reduced maintenance rates. After testing, its performance, efficiency, and reliability fully meet the production requirements and comply with the hygiene standards of the slaughter industry.

Usage: First, blanch the pig to be depilated, which is the most critical step in the depilation process. Usually, a hot pot can be installed in the direction of the scraper with a rake. After scalding the pig, pick it up to the rake and turn on the planer. Control the rake to put the pig into the depilation area and start depilation. This product is divided into 150 hydraulic type, 180 hydraulic type, 200 hydraulic type, 300 hydraulic type, etc. according to the different slaughter quantities of customers.

Pig shearing machine is an essential equipment in the process of pig slaughtering. In the past, manual shearing was time-consuming and laborious, and the shearing was not thorough. The equipment has a spacious interior, simple operation, and high work efficiency, and is widely used in major slaughter and processing plants.

The pig grooming machine consists of a body, a motor, a hydraulic system, a transmission system, a hair removal roller, a rake, etc. The hair removal machine is equipped with a hot pot in front, and the soaking and ironing process is very important, which directly determines the effect of hair removal. Working principle: The hydraulic system drives the rake to remove the scalded pigs from the scalding pool and put them into the machine. The transmission system drives the depilation roller to rotate at high speed, causing the pigs to rub against the rubber block inside the equipment to achieve depilation. The hair removal rate is over 98%, the hair removal effect is good, and it will not scratch the surface of the pig body, receiving unanimous praise from customers.

The 180 type pig dehulling machine, also known as the mini pig dehulling machine, is mainly suitable for slaughter enterprises with small production capacity. The equipment has two dehairing rollers and can only hold one pig at a time. The weight of the pig is controlled within 300 pounds.

Equipment features:

The frame is made of high-quality carbon steel, which is sturdy and durable.

2. The hair removal roller is equipped with rubber blocks to prevent scratches on the surface of the pig during hair removal and maintain its integrity.

3. The hair removal effect is good, reaching over 98%.

4. High production efficiency, pigs can complete hair removal in less than 20 revolutions within the equipment.

5. There is a water pipe installed above the device. When removing hair, turn on the water pipe switch and clean the burrs while removing them.

6. The bearing part is equipped with a waterproof system, which reduces the equipment's failure rate.

7. Easy to operate, one worker can complete hair removal work, saving labor.

Equipment usage and maintenance:

1. Check if all components of the equipment are functioning properly before starting work.

2. The screws on the hair removal roller should be checked regularly for looseness and detachment to prevent affecting the hair removal effect.

3. The rotating parts such as bearings should be regularly lubricated with butter to prevent component damage caused by a lack of lubricant.

4. Clean the interior of the equipment thoroughly and maintain its hygiene after completing each task.

Pig grooming machines can be divided into 180, 200, and 300 types according to their models. Different models are suitable for different production volumes. Customers can choose according to their own production volume.

after-sale service:

1. Warranty service: The product is covered by a one-year warranty from the date of successful debugging. During the warranty period, any damage to the product caused by non-human factors will be repaired free of charge (note: vulnerable parts are not covered by the warranty).

2. Debugging service: If debugging is required, our company is responsible for sending personnel to the site for debugging, training operators, and after passing the debugging, the buyer will issue an acceptance report.

3. Training service: Both the supply and demand sides will cooperate in a friendly manner, and our company will send technical personnel to assist in guiding installation and debugging until the equipment can be used and operated normally.

4. Repair service: In the event of equipment malfunction that cannot be resolved by the buyer through repair, the supplier will arrive at the site for service upon receiving notification.

Technical parameters:

Power: 7.5+3KW

Voltage: 380V

Size: 2350 * 1200 * 2060 mm