Technical parameters:
Voltage:380VA

Power: Active motor2.2 to 5KW (depending on the length of the bloodline and customer requirements)
Production:350-500 heads per hour
Standard load:Pigs weighing less than 1000 pounds

Work Originaltexture

The automatic bloodletting line for live pigs is an automatic conveyor line for draining blood in large and medium-sized pig slaughterhouses. The complete set of equipment consists of a driving mechanism, a tensioning mechanism, a rotating mechanism, and a transmission chain.

The automatic conveyor line adopts the adjustment of the driving mechanism, tensioning mechanism, and rotating mechanism to ensure the uniform and smooth movement of the transmission chain; The operator uses a buckle chain to hang the knocked out pigs on the flat conveyor onto the double pulley hook of the automatic blood drainage conveyor line, and a transmission chain drives the double pulley hook to move forward, which in turn drives the pigs to move forward. Bring the piglet to the blood drainage station to complete the operation at this station; During the process, the pigs are automatically transported without interruption, resulting in a very high production efficiency; It effectively solves a series of problems such as manual pushing of pigs forward, high energy consumption, and low efficiency when using other manual push lines in China.

after-sale service

1. Warranty service: The product is covered by a one-year warranty from the date of successful debugging. During the warranty period, any damage to the product caused by non-human factors will be repaired free of charge (note: vulnerable parts are not covered by the warranty).

2. Debugging service: If debugging is required, our company is responsible for sending personnel to the site for debugging, training operators, and after passing the debugging, the buyer will issue an acceptance report.

3. Training service: Both the supply and demand sides will cooperate in a friendly manner, and our company will send technical personnel to assist in guiding installation and debugging until the equipment can be used and operated normally.

4. Repair service: In the event of equipment malfunction that cannot be resolved by the buyer through repair, the supplier shall arrive at the site for service within three days after receiving notification.