Product Features

The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipeline is high.

Good aging resistance, normal service life can reach more than 50 years.

The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial wastewater discharge and transportation.

The pipeline has a low friction coefficient, smooth water flow, is not easily blocked, and requires less maintenance work.

The material has a high oxygen index and self extinguishing properties.

The coefficient of expansion of the pipeline is small, at 0.07mm/m ℃, and the deformation is less affected by temperature. The thermal conductivity and elastic modulus are small, and compared with cast iron drainage pipes, the frost resistance is excellent.

The connection of pipes and fittings can be achieved through bonding, with a simple construction method, easy operation, and high installation efficiency.

Industrial and civil building indoor and outdoor drainage pipeline engineering, continuous discharge of domestic sewage temperature not exceeding 40 ℃, instantaneous discharge of sewage temperature not exceeding 80 ℃; Industrial wastewater that does not corrode pipes can also be used.

pipeline connection

The pipe socket connection should be strictly operated according to the following procedures:

① Wipe the pipe socket and fitting socket clean before bonding connection.

② Measure the depth of the socket and mark it at the pipe end.

③ Apply adhesive first to the socket and then to the socket, with a uniform and appropriate coating.

④ Align with the direction, insert into the marked area at once, and rotate 1/4 turn.

⑤ Wipe off any remaining adhesive on the socket.

⑥ Let the bonded pipeline stand until the interface solidifies.

The safe use of adhesives should comply with the following regulations:

① Adhesives and cleaning agents should be used immediately upon opening, and should not be used by non operators.

② There should be no open flames at the bonding point, and ventilation should be good.

③ Construction should not be carried out below -10 ℃, and the bonding points should not be baked with fire.

④ Construction personnel should be equipped with gloves. When adhesive accidentally enters the eyes, immediately rinse with plenty of water and take to the hospital for treatment.

Installation Instructions

Sawing and beveling:

The length of the saw pipe is determined layer by layer based on actual measurements and the dimensions of each connecting pipe fitting. It is advisable to use fine toothed saws, cutting knives, and pipe cutting machines as sawing tools. The fracture surface should be flat and there should be no deformation at the fracture surface. The socket part to be bonded can be filed with a medium plate file to form a 15 ° -30 ° groove. The groove length is generally not less than 3mm, and the groove thickness should be 1/3-1/2 of the pipe wall thickness. After the groove is completed, the debris should be cleaned thoroughly.

Protection of socket:

After connecting the socket interface, the extruded adhesive should be wiped clean with cotton yarn or a dry cloth dipped in a small amount of acetone or other cleaning agents. According to the properties of the adhesive and climatic conditions, let it rest until the interface is cured. The solidification time for winter construction should be appropriately extended.