PMS963M color screen multifunctional power meter (96 * 96)

PMS963M Color Screen Multifunctional Power Meter (96 * 96) Product Features Introduction:

1. Johnson Smart Instrument adopts switch mode power supply, wide voltage AC/DC universal, and adds high-voltage capacitors and supply mode inductors at the power input end to filter out harmonic interference to the power grid, which meets EMC electromagnetic compatibility requirements. Domestic products generally do not have some functions.

2. All electronic components such as resistorsAll capacitors are made of pure imported products (such as Murata from Japan, Black Diamond from Japan, Guoju, etc.), and are made of fully automatic imported lead-free and environmentally friendly solder patches.

External dimensions

Type 96: Frame (mm): 96 * 96 Hole (mm) 91 * 91 Depth (mm) 78

Parameter function

Basic functions: three-phase I, U, Kw, Kvar, Kwh, Kvar, Hz, cos φ, RS485/Modbus, color screen LED display

Extended functions: 4DI (K), 2DO (O), 2AO (M), 2-channel pulse (P)

Compliant with standards

GB/T 13729_2002 Remote Terminal Equipment
IEC61000-4-2:1995 Electrostatic discharge immunity test level 3
IEC61000-4-4:1995 Electrical fast transient burst immunity test level 3
IEC61000-4-5:1995 Surge Immunity Test Level 3

operation parameters

Working power supply: 85VAC~265VAC/85VDC~265VDC, power consumption<>
Analog sampling rate: 64 points per cycle
Supporting wiring methods: three-phase four wire system 3CT, 1CT and three-phase three wire system 3CT, 2CT, 1CT
RS485 communication: Supports Modbus protocol, communication rate (60012002400480096019200), maximum node capacity of 32
Communication response time: 20ms (9600bps)
Operating environment: -20 ℃~60 ℃
Humidity: 95% without condensation
Insulation complies with DL478, vibration complies with GB7261-87, and anti-interference complies with GB6162
Protection level: Panel IP54, Shell IP20
Weight: 0.5Kg
Tracking frequency range: 45~65Hz (resolution: 0.02Hz)
Accuracy: The acquisition part (U, I) is at level 0.2, and the calculation part (P, Q, S) is at level 0.5; (Please specify when ordering at level 0.2)
PT frequency input: 220V on the secondary side or standard 100V (input continuously overloaded to 1.25 times the rated value)
Primary side 100V~35000V

CT rated input: 5A/1A (continuously overloaded to twice the rated value), (indicate the required type when ordering)

Jiangsen Factory exterior and introduction

Corner of the workshop

.