PCR laboratory transfer window | Nucleic acid testing laboratory transfer window-Fornitore globale

No. 8 Jiahong Road, Changbian Village, Shiji Town, Panyu District, Guangzhou City (Jinying Industrial Park)

Choose a convenient location on the wall and then open a hole. The hole is usually about 10mm larger than the diameter of the stainless steel clean transfer window. Place the stainless steel clean transfer window into the wall, usually installed in the middle of the wall, to maintain balance and fixation. Use rounded corners or other decorative strips to decorate the gap between the stainless steel clean transfer window and the wall, and seal it with glue for decoration. The following introduces the installation, use, characteristics, and principles of stainless steel clean transfer windows.

When using, first open a door and place the object to be transmitted into the box. At this time, the door cannot be opened through the interlocking mechanism. After closing the door, the door can be opened to remove the object to be transmitted and complete the transmission work.

Whether it is mechanical interlocking or electronic interlocking, stainless steel clean transfer windows can only open one door. After installation, the inside and outside of the stainless steel clean transfer window should be cleaned and sterilized, and then regularly inspected and maintained to see if there is any interlocking failure or damage to the sterilization lamp. Generally, sterilization lamps are fragile products.

Characteristics of clean transmission window in PCR laboratory:

1. The standard stainless steel clean transfer window adopts a rounded corner that is more suitable for the cleanroom principle

2. High quality cold-rolled steel plate spray coating on the outer wall

3. The short distance stainless steel clean transfer window workbench adopts a non powered drum, making it easy and convenient to transfer items

4. Both sides of the doors are equipped with mechanical or electronic interlocking devices to ensure that they cannot be in the open state at the same time

5. Pairable call intercom

Structural characteristics and principles of stainless steel clean transfer window:

Stainless steel clean transfer window is a passage for transferring goods between areas of different cleanliness levels. It is a device installed at the entrance and exit of a clean room or between rooms of different cleanliness levels, which blocks the flow of indoor and outdoor air when transferring goods, in order to prevent polluted air from entering cleaner areas and causing cross contamination. The stainless steel clean transfer window is usually closed. The two doors are equipped with electronic interlocking devices. When delivering goods, the sender first opens the first door and immediately closes it after delivering the goods. When the other party receives a signal (the stainless steel clean delivery window control panel is equipped with a signal indicator light), the sender opens another door, takes out the materials, and then closes the door. Both doors cannot be opened simultaneously when powered on.

The stainless steel clean transfer window blows high-speed and clean airflow from the top when transferring goods, removing dust particles on the surface of the goods. It is equipped with a UV sterilization lamp inside, which can effectively kill bacteria on the surface of the goods. When the shower is completed, the other door can be opened to retrieve the goods. The clean airflow acts as an airlock to ensure that the air outside the cleanroom does not affect the cleanliness of the room. The two side doors cannot be opened simultaneously through electronic interlocking control. The inner edges of the two side doors are equipped with special sealing strips to ensure the airtightness of the stainless steel clean transfer window.

Stainless steel clean transfer window is an auxiliary equipment for clean rooms, mainly used for the transfer of small items between clean areas and clean areas, as well as between clean and non clean areas, in order to reduce the number of times the clean room is opened and minimize pollution to the clean room. The stainless steel clean transfer window produced by Yuantuo Purification Equipment Factory is made of high-quality stainless steel plate, with a smooth and even surface. Internally, it has a circular arc structure, making it easy to clean. Transferring goods is easy and convenient. The double doors are interlocked to effectively prevent cross contamination, equipped with electronic interlocking devices and UV sterilization lamps, ensuring safe and simple operation.