Shanghai Nanshi Storage Tank Equipment Technology Co., Ltd
Home>Products>Oil pipe flame arrester
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13661577763,13918432353
  • Address
    No. 412 Guangqian Road, Fengxian District, Shanghai
Contact Now
Oil pipe flame arrester
Oil pipe flame arrester
Product details
Product Introduction

Oil pipe flame arresterModel:GZW-I

Valve body material

Carbon steel, stainless steel 304, 316, 316L aluminum alloy

Fire retardant core material

Stainless steel fire-resistant corrugated plate

Sealing ring material

Polytetrafluoroethylene

pressure rating

0.6-2.5MPa

Nominal diameter

DN50-500

Environmental temperature ℃

-30~+60

Explosion proof level

BS 5501:IIA、IIB、IIC

connection method

flange connection

Oil pipe flame arresterIt is to prevent external flames from entering equipment or pipelines containing flammable and explosive gases, or to prevent flames from spreading between equipment and pipelines. A flame arrester is a device that uses flames to pass through narrow pores in a thermal conductor

From time to timeDesign and manufacture based on the principle of extinguishing due to heat loss. The fire-resistant layer structure of flame arresters includes gravel type, wire mesh type, or corrugated type. Suitable for combustible gas pipelines, such as gasoline, kerosene, light diesel

Stupid, stupidStorage and flare systems for crude oil and other oil products, gas purification and chemical systems, gas analysis systems, coal mine gas emission systems, fuel gas pipelines for heating furnaces, and can also be used for acetyleneoxygen

Gas, nitrogen, naturalGas pipeline supplies. This valve can be used in conjunction with a breathing valve,It can also be used separately.

Main performance:

1Qualified explosion resistance performance,continuous13The secondary explosion resistance performance test can block fire every time.

2Qualified fire resistance performance, fire resistance test1There is no tempering phenomenon within hours.

3The shell water pressure test is qualified. This product has a reasonable structure, light weight, and corrosion resistance. Easy to maintain and install. The flame arrester core is made of stainless steel material,Corrosion resistant and easy to clean.

flame arresterworking principleMost flame arresters are composed of solid materials with many small, uniform, or non-uniform channels or pores that can pass through gas, and these channels or pores are required as much as possible

The small,Small enough to pass through flames. In this way, the flame enters the flame arrester and is divided into many small flame streams that are extinguished. The mechanism by which flames can be extinguished is through heat transfer and wall effect.

flame arresterstandard: Flange standard:GBTheHGTheSHTheHGJTheJBTheANSLTheJISWaiting for standards. (User specified, please indicate pressure level) Execution standard:GB13347-92Petroleum Gas

Pipeline obstructionfireFire resistance performance and test methods of flame arrestersSH/T3413-99Selection, Inspection, and Acceptance of Fire Arresters for Petrochemical Petroleum Gas PipelineHG/T20570.19-95The setting of flame arresters. block

Firearms production and inspectionInspection and acceptance criteria:SY/T0512-1996Fire arresters for oil storage tanks, testing basis:GB5908-86Performance and experimental methods of flame arresters for oil storage tanks.

YouTubeflame arresterMain purpose:

1On pipelines transporting flammable gases.

2Torch system.

3Oil and gas recovery system.

4The pipe network for heating furnace fuel gas.

5Gas purification and chemical system.

6Gas analysis system.

7Coal mine gas emission system.

8Hydraulic pressure test2.4MPaNo leakage.

flame arrestersize

Specifications and Dimensions

DNmm

External dimensions(mm

L

H

D

K

n*d

50

190

200

165

125

4*18

65

205

210

180

145

8*18

80

220

220

200

160

8*18

100

240

240

220

180

8*18

125

280

260

245

210

8*18

150

330

285

285

240

8*22

200

380

325

340

295

12*22

250

450

365

405

355

12*26

300

520

400

460

410

12*26

350

595

420

520

470

16*26

400

645

450

580

525

16*30

450

710

480

640

585

20*30

500

780

520

715

650

20*33

Oil pipe flame arresterRegular inspection and maintenance should be carried out:

1The flame arrester should be inspected every six months to check whether the flame arrester core is blocked, deformed, corroded, etc.

2The blocked fire-resistant layer core should be cleaned thoroughly to ensure that each hole on the core is unobstructed, and any deformed or corroded fire-resistant layer should be replaced.

3When reinstalling the fire-resistant layer core, it should be ensured that the joint surface is tight and there is no air leakage.

Shanghai Nanshi is a professionalflame arresterManufacturer, products produced by the company: breathing valve, flame arrester, flame retardant breathable cap, fireproof vacuum pressure cap, aluminum alloy ball valve, aluminum alloy single

A series of supporting accessories including flange ball valves, oil discharge ports, double door bottom valves, and oil measuring holes.

Welcome to visit our website【http://www.shhxfcj.com,If you have any questions.You can call us,We will do our best to provide you with high-quality service.

Telephone:.

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!