The sampling station is also known as the pathology sampling station, laboratory sampling station, stainless steel sampling station, and closed pathology sampling station. The sampling table is widely used in pathology laboratories to provide a clean sampling environment for laboratory personnel, in compliance with the relevant requirements of the "Environmental Protection Regulations", and is the equipment of pathologists. It is also one of the very important equipment in the laboratory.1. The main frame panel of the sampling platform is made of 1.0mm stainless steel SUS304 mold, folded and welded, and the side panels are made of 1.0mm stainless steel SUS304 mold, polished and brushed on the surface;

2. High power suction device, easy installation of exhaust system, low noise, can quickly remove harmful gases.

3. The long waist groove of the exhaust hood is formed, and there is a wide storage platform above the exhaust hood, which can store the items needed for material collection;

4. The entire sampling table has a certain slope
The sampling table is made of 304 stainless steel material, which can effectively prevent water and corrosion. Different styles and accessories are available according to different customer needs, and the operation is practical, safe, and convenient; A reasonable ventilation system can completely solve the problem of harmful gases during the sampling process and provide a clean and safe sampling environment for experimental personnel.
The sampling table has a beautiful appearance, advanced technology, practicality, and complete functions; It is the preferred safety device for pathologists.The sampling station is one of the very important safety equipment in pathology laboratories:
The sampling table is made of 304 stainless steel material, which can effectively prevent water and corrosion. Different styles and accessories are available according to different customer needs, and the operation is practical, safe, and convenient; A reasonable ventilation system can completely solve the problem of providing a clean and safe sampling environment for experimental personnel during the sampling process. The material platform has a beautiful appearance, advanced technology, practicality, and complete functions.

Configuration instructions for the sampling station：
1. The material is a 1.0mm thick 304 stainless steel shell and a 316 stainless steel tabletop.

2. The exhaust system under the sampling platform, high-power suction device, and low noise. Bottom exhaust, long strip louvered acid and alkali resistant stainless steel exhaust hole, exhaust air volume of 500-600m3/h, full pressure range of 330-550pns, working wind noise<50db, wind speed ≥ 0.8m/s, equipped with high-quality PVC anti-corrosion duct.

3. Take the spotlight from the sampling platform.

4. Hot and cold water telescopic faucet, external interface.

5. Using Taiwanese electric water heaters.

6. 40W ultraviolet disinfection lamp for sampling platform.

7. Sample table 40W fluorescent lamp.

8. Material collection platform 1400W automatic induction drying phone.

9. Automatic flushing device for the sampling table surface.

10. A stainless steel sink with a depth of 280mm and a drainage funnel with a filter screen underneath.

11. Sampling table crusher.

12. Magnetic adsorption tool rack for material collection. Adsorption material tool.

13. Sampling table magnifying glass.

14. The activated carbon air purification device on the sampling platform effectively adsorbs gases to ensure the health of pathologists (it is recommended to replace activated carbon every 3 months).

15. Sample station eye wash.

16. Sampling station camera.

The specifications, dimensions, and technical requirements of the sampling table can be customized non-standard!Recommended reading:Customized laboratory furniture　Laboratory fume hood