VIP member
Noise sensor detection module BYZ-08
Noise sensor detection module BYZ-08
Product details
1、 Introduction to Noise Sensor Detection Module
The BYZ08-ZY noise detection sensor module adopts imported components to calibrate the output signal TTL and IIC, designed for low-cost application users of integrators. The direct reading noise detection module is uniformly calibrated in the experimental cabin, and the data is stable and reliable.
2、 Application fields of noise sensor detection module
This product is widely used in scientific research institutions, portable/handheld detectors, fixed gas transmitters, atmospheric environment detectors, dust and noise detection systems, noise monitors, detectors, automation control systems, environmental noise monitoring systems, industries, factories and other places that require measurement.
3、 Working principle of noise sensor detection module
The noise sensor is precisely because the sensor is equipped with a sound sensitive capacitive polarizer microphone. Sound waves cause the polarizer film inside the microphone to vibrate, resulting in a change in capacitance and a corresponding small voltage change, thus achieving the conversion of optical signals to electrical signals.
4、 Characteristics of noise sensor detection module
1. A direct reading noise decibel detection module developed using original imported sound sensors;
2. Multi point calibration process production, high detection accuracy, and sensitivity;
3. Unique stainless steel probe independent packaging design, easy to embed into other devices or casings;
4. The core components of the main control board circuit are completely shielded, which not only looks beautiful but also has strong anti-interference ability;
5. Multiple output TTL/I2C and standard Modbus Rtu communication 485 interfaces are reserved for integration in various applications.
5、 Noise standards
| Noise level | Environmental standards (based on the hearing of ordinary people) |
| 0~20 dB | Very quiet, almost imperceptible; |
| 20~40 dB | Quiet, like soft whispers; |
| 40~60 dB | General and ordinary indoor conversations; |
| 60~70dB | Noisy and nerve damaging; |
| 70~90dB | It's very noisy and nerve cells are damaged. |
| 90~100dB | Increased noise and hearing loss; |
| 100~120dB | Unable to tolerate, temporarily deaf after just one minute. |
| Above 120dB | Extremely deaf or completely deaf |
6、 Technical parameters of noise sensor detection module
| Technical Specifications | BYZ08-ZY |
| detectparameter | noise |
| Detection Principle | Electrified capacitor type |
| measurement range | 35-100dB |
| resolution | 0.1dB |
| precision | ± 1.5dB |
| Sensor lifespan | more than 3 years |
| warm-up time | <60S |
| frequency range | 20Hz~12.5KHz |
| response time(T90) | <30S |
| nonlinear | ± 2% |
| repetitiveness | ± 2% |
| power supply voltage | DC5V or 12V |
| power consumption | 0.1W(平均) |
| signal output | TTL and IIC, RS485 (customizable) |
| working environment | -20~50℃; 0-95% RH (no condensation) |
| storage environment | -40~60℃; 0-100% RH (no condensation) |
| Weight/Size | 60mm×40mm× 15mm |
| Interface Specification | XH2.54(4pin) |
| remark |
7、 Packaging size of noise sensor detection module
8、 Definition of pins for noise sensor detection module
| sequence | Pin marking | Instructions |
| Pin 1 | GND | Public areas |
| Pin 2 | B/R | Serial port connection/485B/SDL |
| Pin 3 | A/T | Serial port transmission/485A/SCL |
| Pin 4 | V+ | Positive power supply |

Online inquiry
