Before operating the multifunctional corn double harvester, it is necessary to survey the roads and fields, and clearly mark dangerous areas and obstacles. When maintaining, inspecting, and troubleshooting the harvester, the power must be cut off and the engine must be turned off before proceeding; When performing mechanical maintenance or overhaul under the harvester, the harvester must be lifted and supported firmly with a safety bracket or cushion block. Only after confirming safety can it be carried out; It is strictly prohibited to use open flames for lighting when maintaining machinery or refueling at night. When unloading grain, people are not allowed to enter the grain silo, iron tools and other tools are not allowed to be inserted into the grain silo, and the grain receiving personnel are not allowed to put their hands into the grain outlet. When transferring the plot, lift the harvester to a higher position and lock it. It is strictly prohibited to use the harvester to transport goods. Always check if the seats and backrests of the food receiving personnel are secure and reliable.

Multi functional corn double harvesterWork speed

Under normal circumstances, if the plot is flat, the crops are mature and in the yellow maturity period, and there are fewer weeds in the field, the forward speed of the corn harvester can be appropriately increased. When crops are in the late stage of milk ripening or early stage of yellow ripening, their humidity is relatively high. When harvesting, the forward speed should be chosen to be lower. When grains are in the late stage of yellow ripening or yellow ripening, the humidity is lower and they mature evenly. The forward speed can be appropriately chosen to be higher. After rain or in the morning and evening, there is a lot of dew, and the humidity of crop straw is high. Therefore, it is necessary to choose a lower forward speed during harvesting. Around noon on a sunny day, when the grains and straw are dry, choose to move faster. For crops with high density, tall plants, and good yield, the forward speed should be slower during harvesting, while for grains with low density and sparse height, the forward speed can be faster. When the corn harvester is first put into operation, the technical status of each component is in the observation stage of use, the operating load should be smaller, and the forward speed should be slower. Observing the use of corn stalks and earsQingchu harvesterAfter a period of time, the technical status is indeed stable and reliable, and the crops are mature and dry. The forward speed can be faster to fully utilize the efficiency of the machinery operation.