Precision Electronics2020standard load(torque)After calibration, the measuring instrument can directly display the measured values of various physical quantities, and its application scope includes:

1Load, torque, and pressure measurements, sensor output signal ratio values（mV/V）Measurement.

2Calibration and testing of load, torque, and pressure sensors.

3Zero position and temperature compensation for various strain gauges.

4The load torque measurement display in the comparative force measuring machine, torque machine, material testing machine, and torque wrench calibration measuring device.

5Various types of stress-strain measurements.

Due to a series of breakthroughs in key technological fields2020The standard load measuring instrument has unparalleled performance and extremely high cost performance ratio. Its main features are as follows:

1Synchronous digital ratio type charge balance type new analog-to-digital conversion technology provides ultra-high resolution and measurement accuracy（24bitA/D，1600Ten thousand inner codes, valid inner codes greater than100Ten thousand, external display division number20Ten thousand, the minimum input sensitivity can reach0.1μV/d.A/Dconversion rate50time/In seconds. Overall accuracy0.005%FS.

2Synchronized digital ratio technology, the standard voltage source in the table simultaneously performs analog-to-digital conversion on the sensor bridge voltage and output signal, and uses digital calculation methods to obtain ratio measurement data, greatly reducing instrument drift. The instrument can be used immediately after startup without preheating.

3、-9～9mV/Vor0～9V/VThe signal measurement range is suitable for output sensitivity of1mV/VThe2mV/VThe3mV/VThe4mV/Vto9mV/VVarious types of strain gauges.

4The ultra wide zero adjustment range can reach up to the set range-150%～150%Especially suitable for measuring small dynamic loads under large static loads.

5The independent ground wire and symmetrical supply bridge circuit structure greatly improve the reliability of force measuring instruments and the safety of sensors in the event of surge currents and lightning strikes on the power grid.

6Unique signal slope control technology effectively suppresses electromagnetic interference（EMI）.

7、10Segmental linear correction capability improves the measurement accuracy of the system.

8, storable and retrievable10Calibration data for sensors with different ranges.

9Multiple unit conversions includeN(Newton)kgf(kilogram force) and1bfMeasurement of output sensitivity of (pound force) and sensors（mV/V）

10AdoptingACCELERATEConversion acceleration technology with fast peak measurement capability.

11The independent hardware monitoring circuit fully ensures the reliable operation of the instrument.