IEquipment photo, name and model: Fully automaticCan sealing machine, modelFG130E

IIEquipment performance description and characteristics

1sealing diameterφ40~φ130mm， Sealing height of 60-220mm;

2Stable production efficiency40 cans per minute;

3The air compressor needs to be configured separately, and the power of the air compressor is requiredAbove 3KW, 0.6Mpa gas supply pressure;

4The overall appearance material is mainly made of stainless steel304 material, thickness 1.5mm;

5use4 rolling cutters for sealing, with more uniform sealing force and sealing performance indicators that meet international standards;

6Adopting intelligent program design and touch screen control, easy to use and set up;

7The roller is imported from Taiwan, and the material isSKD31 Japanese mold steel, featuring a front and back design, with a lifespan of over 5 million seals;

8Setting up uncovered and unsealed cans, as well as fault detection shutdown, effectively reduces equipment failures;

9The lower cover can be covered in one go200 pieces (one tube);

10Replacing the sealing can diameter requires changing the mold, and the replacement and adjustment time is approximately40 minutes;

11Replacing the sealing cylinder diameter requires replacing the pressure head+Bottom cover+turntable+guardrail, different materials of cans and lids also need to be replaced with sealing rollers;

12Changing the height of the jar without the need to replace accessories, using a hand cranked screw design, adjusting the height takes about5-10 minutes;

13Strict testing methods are used to test the sealing effect before shipment and delivery to ensure product quality;

14The defect rate is extremely low, with iron cans below one ten thousandth, plastic cans below one thousandth, and paper cans below two thousandths;

15The pressure head is made of chromium12 molybdenum vanadium quenching treatment, hardness exceeding 50 degrees, service life exceeding 1 million cans;

16Conveyor belt length3 meters, height 0.9 meters, chain width 114mm;

17The device size is long2.95 * width 0.95 meters * height 1.7 meters, packing size is 1.35rice×1.20rice×1.90Rice;

18The net weight of the equipment is approximately500KG， The gross weight is approximately 550KG;

19Main motor power1.1KW/220V， Conveyor belt motor 0.2KW/220V, total power: 1.3KW

20The material of the conveyor belt is nylonPOM material, the chuck is made of PP board material;

21The company'sThe 7th generation product has accumulated experience and feedback from over 3500 customers using the same product, with an extremely low failure rate;

22On one side of the fuselage, there is a maintenance guide with illustrations and text, making maintenance operations simple and convenient.

IIIThe electrical configuration list of the equipment is shown in the following table

IVRandom list of vulnerable parts

1. 2 fuses;

2. Approximately 5 conveyor belt chains;

3. 1 motor V-belt;

4. 4 springs

VRandom Tool List

1. A set of standard hexagonal keys;

2. 1 hook shaped wrench;

3. 1 open-end wrench each for 17 and 19;

4. 1 manual, 5 photoelectric screwdrivers

VIOptional spare parts available for purchase

1. Photoelectric switch and proximity switch;

2. Pressure head;

3. Roll cutter;

4. Cylinder;

5. Motor

VIIWarranty period

Free on-site maintenance service for quality problems within one year after equipment delivery (only in Chinese Mainland)The warranty period for spare parts is as follows:

1Core components (cam, gear, spindle, shaft sleeve, bearing, and synchronous pulley) come with a two-year free warranty;

2One year free warranty for motor and indexing disc;

3One year free warranty for programming processors, solenoid valves, relays, cylinders, photoelectric switches, proximity switches, AC contactors, touch screens, and pneumatic triplets;

4Belt and synchronous belt one-year free warranty