Mini film sample set

A polymer film prototype specialized for infrared transmission analysis that can be achieved in 5 minutes

characteristic:

Design of Integrated Hydraulic Press, Heating Pressure Plate, and Temperature Controller

Compact size, convenient storage, and portability

The film has good reproducibility and is easy to use

No need for chemicals, low cost

, sixDifferent types of gaskets

This design allows the heating plate to be preheated first, raising the temperature to the desired melting point of the sample and maintaining this temperature. Before the sample is introduced into the preheating plate, the thin film prototype can independently prepare the corresponding load and suitable shaping ring for several grams of the sample.

When the thin film prototype reaches the preset temperature and stabilizes, it is usually used0.5TLoad the rotating screw to heat press the film. Once moved up from the hot press machine

Come on, the low-temperature block film preparation prototype can be quickly cooled to room temperature on a cooling plate, and the pressed film can be removed.

Thin film samples can be embedded in one3×2Inch self-adhesive card(Specacard)Used for infrared transmission spectroscopy analysis. Compared with traditional methods, this process can shorten the period of thin film preparation. In fact, the period of making a thin film sample can be less than5minute.

How to prepare thin film samples

Place the insulation board properly,Choose the shaping ring and smaller aluminum film, and place them on the lower component.

1)Place the sample in the center of the aluminum film and cover it with a larger aluminum film and upper components

2)Place the prepared above components as a whole between the preheating plate planes, and then apply1TLoad of position.

3)Once the sample is compressed and removed from the tablet press, separate the components and carefully peel off the aluminum film from the sample.

4)Put the made film intoSpecacardThen place them together in a spectrometer for analysis.

Technical parameters:

· Rapid and reproducible preparation of thin film samples

· The melting point range of the sample is from room temperature to 260 ℃

· Standard film thicknesses of 15, 25, 50, 100, 250, and 500 μ m

· Diameter 15mm

· Pressure range 0-2 tons

· The sample kit includes a hydraulic press and an integrated heating plate

· Cycle of 5 minutes

· Heating pressure plate diameter 25mm

· Maximum power of heating pressure plate: 35W

· Temperature controller: dual digital display, accuracy of 1 ℃

· Heating pressure plate adjustable distance 0-20mm

· Independent cooling plate

· Weight 5.7kg

· ordering information

· Mini film sample set

· GS03970Mini film sample set

· Spare parts and consumables

· GS03971Mini film sample module

· (Including pressure plate components, insulation board, lower pressure plate components, and shaping ring components)

· GS03972Forming Circle(15, 25, 50, 100, 250And 500 μm

· GS03973aluminum film(200answer)

· GS03974Mini film prototype cooling plate

· GS03975Mini film prototype pressure plate(Including upper pressure plate, insulation plate, and lower pressure plate)

· GS03800 Specacards (100wrap)diameter10mmThe circular light hole

· GS15628Stainless steel tweezers