VIP member
Microwave quartz sand drying equipment
Our company's quartz sand drying equipment, also known as quartz sand microwave drying equipment, is designed according to the special requirements of
Product details
The quartz sand drying equipment produced by our company is also known as quartz sandMicrowave drying equipmentDesign according to the special requirements of quartz sand powder. The equipment has the characteristics of high automation, low loss of dry dust, high energy utilization rate, low operating cost, compact structure, and small footprint. Especially suitable for drying materials with high final moisture content, whether it is free water or bound water, it can be dried to a moisture content of less than 1% in a few to ten minutes. This device can also be used as a quartz powder drying device orSand and gravel drying equipment.
Weiyas CompanyThe professionally produced quartz sand drying equipment can be heated both inside and outside, so there is no need for heat conduction during heating and drying. The drying time is short, the temperature is uniform, and energy saving and emission reduction are achieved.
The microwave quartz sand drying equipment is equipped with:
1. Automatic feeding system. Through the feeding hopper, the quartz sand is automatically spread to evenly distribute the material into the microwave drying oven.
2. Microwave drying system. After entering the microwave drying system, the material rapidly heats up under the direct action of the microwave electromagnetic field; Water evaporates. The microwave heating system is equipped with an automatic flipping system, which allows the bottom moisture of the material to be discharged in a timely manner to achieve rapid and uniform drying.
3. Discharge and residual material recycling system. After the material is dried, it enters the weighing packaging through the screening and crushing system. Sometimes, due to the adhesion of the powder itself, a small amount of material may adhere to the conveyor belt; At this time, residual materials are collected through the residual material recovery system to avoid material spillage and loss.
Microwave quartz sand dryerMain technical parameters:
1. Microwave power: 40KW (adjustable)
2. Dehydration rate: 40 kg/hour
3. Power supply: three-phase five wire 380V
4. Height of inlet and outlet: 50mm
5. Belt width: 750mm
6. Transmission speed: 0-5 m/min (variable frequency speed regulation)
7. Drying temperature 80-120 degrees (adjustable and controllable)
8. Dimensions (length x width x height): approximately 11630 x 1362 x 1750mm
The quartz sand dryer can be customized according to production capacity due to its size. The above parameters are for reference only. For detailed equipment technical parameters and prices, please contact us for accurate information. We will customize the equipment plan according to your application needs.
Weiyas CompanyThe professionally produced quartz sand drying equipment can be heated both inside and outside, so there is no need for heat conduction during heating and drying. The drying time is short, the temperature is uniform, and energy saving and emission reduction are achieved.
The microwave quartz sand drying equipment is equipped with:
1. Automatic feeding system. Through the feeding hopper, the quartz sand is automatically spread to evenly distribute the material into the microwave drying oven.
2. Microwave drying system. After entering the microwave drying system, the material rapidly heats up under the direct action of the microwave electromagnetic field; Water evaporates. The microwave heating system is equipped with an automatic flipping system, which allows the bottom moisture of the material to be discharged in a timely manner to achieve rapid and uniform drying.
3. Discharge and residual material recycling system. After the material is dried, it enters the weighing packaging through the screening and crushing system. Sometimes, due to the adhesion of the powder itself, a small amount of material may adhere to the conveyor belt; At this time, residual materials are collected through the residual material recovery system to avoid material spillage and loss.
Microwave quartz sand dryerMain technical parameters:
1. Microwave power: 40KW (adjustable)
2. Dehydration rate: 40 kg/hour
3. Power supply: three-phase five wire 380V
4. Height of inlet and outlet: 50mm
5. Belt width: 750mm
6. Transmission speed: 0-5 m/min (variable frequency speed regulation)
7. Drying temperature 80-120 degrees (adjustable and controllable)
8. Dimensions (length x width x height): approximately 11630 x 1362 x 1750mm
The quartz sand dryer can be customized according to production capacity due to its size. The above parameters are for reference only. For detailed equipment technical parameters and prices, please contact us for accurate information. We will customize the equipment plan according to your application needs.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-