VIP member
Microwave pet feed drying equipment
Pet feed drying equipment does not require other thermal conductors to be installed internally. The heat directly penetrates the feed for overall heat
Product details
Pet feed drying equipmentNo need to install other thermal conductors, the heat directly penetrates the feed for overall heating, with short heating time, good drying effect, energy saving and reduced energy consumption. Our company producesMicrowave drying equipmentComposed of multiple drying boxes, wet materials enter the drying box from the feeding end through a hopper, while dry materials enter the collection box directly from the discharging hopper at the other end, without the need for hot air energy, effectively protecting the working environment temperature in the workshop. The water vapor produced by material drying is discharged from the top of the equipment.
The pet feed dryer has significant differences from general drying equipment during the drying process. Our company's drying equipment has a lower drying temperature to avoid damaging the nutritional value of biological feed.
petFeed drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 30KW (adjustable)
4. Dehydration rate: 30 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 50mm
7. Belt width: 750mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the fact that pet feed dryers are non-standard equipment, the above parameters are for reference only. Please feel free to call us for inquiries or visit our company directly to discuss cooperation.
The pet feed dryer has significant differences from general drying equipment during the drying process. Our company's drying equipment has a lower drying temperature to avoid damaging the nutritional value of biological feed.
petFeed drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 30KW (adjustable)
4. Dehydration rate: 30 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 50mm
7. Belt width: 750mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the fact that pet feed dryers are non-standard equipment, the above parameters are for reference only. Please feel free to call us for inquiries or visit our company directly to discuss cooperation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-