VIP member
Microwave ammonium molybdate drying equipment
The ammonium tetramolybdate drying equipment is a new type of equipment specifically designed for drying chemical products, which is improved from ind
Product details
Ammonium Tetramolybdate Drying EquipmentIt is a new type of equipment specifically designed for drying chemical products, which is improved from industrial microwave ovens. Due toMicrowave drying equipmentDue to its unique heating and drying characteristics, the application of microwave in the drying of ammonium tetramolybdate requires a comprehensive consideration of the material's own characteristics and the characteristics of microwave heating and drying, in order to design a suitable quadrupleAmmonium molybdate drying equipment；Chemical product drying equipmentCompared with drying equipment used in industries such as food, pharmaceuticals, biological products, pharmaceuticals, wood, paper, tea making, etc., the main consideration is the corrosion problem of the product on the equipment. Therefore, acid and alkali resistant stainless steel materials should be used as materials.
Attention must be paid to the specificity of materials and adaptability to working conditions during the design process. So it is necessary to clarify the specific parameters of the material to be dried, such as the material state, the type of moisture content, the processing capacity, the characteristics of the material during the drying process, whether there is corrosiveness, combustion and explosiveness, whether static electricity is generated, the specific requirements of the product, the thermal sensitivity temperature of the material, etc., in order to determine the various parameters of the dryer.
The selection method of manufacturing materials for drying equipment is well known. The material of the drying equipment is an important element in the cost of the drying device. Reasonable material selection is an important means of controlling equipment prices
Ammonium molybdate drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 80KW (adjustable)
4. Dehydration rate: 80 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 60mm
7. Belt width: 900mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 16770 x 1660 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the fact that the microwave ammonium molybdate drying equipment is a non-standard device, the above parameters are for reference only. Please feel free to inquire by phone or go directly toWeiyasCompany inspection and negotiation for cooperation.
Attention must be paid to the specificity of materials and adaptability to working conditions during the design process. So it is necessary to clarify the specific parameters of the material to be dried, such as the material state, the type of moisture content, the processing capacity, the characteristics of the material during the drying process, whether there is corrosiveness, combustion and explosiveness, whether static electricity is generated, the specific requirements of the product, the thermal sensitivity temperature of the material, etc., in order to determine the various parameters of the dryer.
The selection method of manufacturing materials for drying equipment is well known. The material of the drying equipment is an important element in the cost of the drying device. Reasonable material selection is an important means of controlling equipment prices
Ammonium molybdate drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 80KW (adjustable)
4. Dehydration rate: 80 kg/hour
5. Drying temperature: 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 60mm
7. Belt width: 900mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 16770 x 1660 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
Due to the fact that the microwave ammonium molybdate drying equipment is a non-standard device, the above parameters are for reference only. Please feel free to inquire by phone or go directly toWeiyasCompany inspection and negotiation for cooperation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-