1. Flexible spacing between stainless steel metal hoses.

2. Stainless steel metal hoses have good elasticity, no blockage or stiffness.

3. Stainless steel metal hoses are lightweight and have good consistency in diameter.

4. Stainless steel metal hoses have good flexibility, repeated bending, and flexibility.

5. Stainless steel metal hoses have good properties and performance.

6. Stainless steel metal hoses are resistant to rodent bites and damage, preventing internal wires from being worn out.

7. Stainless steel metal hoses have strong bending resistance, tensile strength, and lateral pressure resistance.

8. Stainless steel metal hose is soft and smooth, easy to thread, install and position.

The metal hose series consists of three parts: corrugated pipe, mesh sleeve, and joint, with the main body being corrugated pipe. The corrugated pipe itself has good flexibility, and due to its low longitudinal and bending stiffness, it can smoothly bend at rated bending.

Five elements of metal hose design:

1. Size hose nominal diameter, joint type and size, hose length.

2. The actual working pressure of the pressure hose is selected as the nominal pressure PN/working pressure P.

3. The chemical properties of the medium conveyed in the medium hose determine the material of each component of the hose according to the performance table.

4. The working temperature and range of the medium inside the temperature hose; The ambient temperature during the operation of the hose. When the temperature is high, the allowable high pressure at the working temperature must be determined according to the temperature correction factor to determine the correct pressure level for selection.

5. According to the state of the hose during use, refer to the correct installation method of the hose. Calculate the length of the hose in various motion states and factors such as the small bending radius of the hose. Select the correct length of the hose and install it correctly.