1、 Equipment Overview

Purpose:Metal etching winding machineCooperate with DES cleaning line to achieve automatic rolling, unwinding, and rewinding production
Features: Automatic operation in conjunction with DES cleaning line, improving production efficiency.
2、 Equipment specifications and main technical indicators
1. Processing material: stainless steel strip.
2. Material thickness: 0.02-0.03mm (excluding double-sided pressure drying film thickness).
3. Material width: 100mm to 500mm.
4. Incoming material method: incoming material in the form of coils.
5. Material size: MAX roll diameter 500mm, core diameter 300mm.
6. Material weight: 350KG.
7. Loading height: 750mm.
8. Material core fixing method: fixed with inflation shaft.
9. Conveyor surface height: Connect to the DES cleaning machine, based on the height of the on-site cleaning machine.
10. Transport direction: Transport from left to right facing the operating surface.
11. Substrate conveying method: The receiving machine is equipped with a set of adhesive rollers, driven by servo motors, and operates synchronously with the cleaning machine at the same speed
12. Substrate conveying speed: 0.5-3M/minute, adjustable according to practical usage conditions.
13. Correction device: Each unwinding and rewinding position is equipped with a set of EPC, with an accuracy of ± 1mm.
14. Material receiving device; The unwinding is equipped with a material receiving platform and two sets of pressing clamps.
15. Dust prevention device: The whole machine is sealed with an aluminum extruded acrylic outer cover, and the top is equipped with FFU filtration efficiency class 100 to ensure the winding and unwinding
Positive pressure and cleanliness inside the machine.
16. Equipment working mode: manual and automatic control modes. Under automatic control, it is connected to the main signal of the cleaning machine and works automatically when connected online,Under manual control, the single machine works, and the unwinding and unwinding can be reversed (EPC cannot work when reversed).

Metal etching winding machineSpecification Description:
1. Two sets of material reels, fixed with a single-sided cantilever, with materials loaded and unloaded from the front at a height of 750mm.
The winding shaft adopts an inflatable shaft
2. Two sets of material protective films are placed on a roll, fixed with a single-sided cantilever, and the materials are rolled up and down from the front
The unwinding shaft adopts an inflatable shaft
3. A set of substrate pulling mechanisms and cleaning machines work in conjunction.
The material is transported from the unwinding machine to the winding station after cleaning using adhesive rollers
The roller is driven by a servo motor, and the conveying speed is synchronized with the cleaning line
The roller adopts stainless steel axis and silicone material to ensure that the material surface is not damaged
The roller lift is driven by a cylinder, and the front and rear pressure can be adjusted
7. Electronic Control
PLC+touch screen control, connected to the cleaning machine and discharge machine for operation.
The PLC adopts Mitsubishi PLC from Japan, and the touch screen adopts 7-inch Kunlun communication mode.
8. A set of correction EPC devices drives the entire rack to move, ensuring that the materials are wound neatly.
Metal etching winding machineThe sensor is installed on a manual slide table and its position is manually adjusted.