The CZ-5030 D1 series computer-controlled material testing machine is suitable for testing the mechanical properties of metal and non-metal materials such as tension, compression, bending, shear, tearing, and peeling. It can also perform automatic control tests for constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycling, deformation cycling, and displacement cycling. Calculate indicators such as elongation, tensile strength, bending modulus, elastic modulus, yield strength, net energy, folding energy, total energy, etc It can be equipped with expansion devices such as high and low temperature test chambers and high temperature furnaces.

Using PC for data processing and analysis, the experimental results can be automatically saved. After the experiment is completed, the experimental curve can be retrieved again, and the experimental process can be reproduced through curve traversal, or curve comparison and amplification can be performed. The experimental software on Windows and Visit platforms has strong data and graphics processing capabilities, and can print complete experimental reports and curves in real time.
Implementing standard GB/T16491-1996

One Technical Specifications
A. Force range: 300KN
B. Power resolution: 1/100000
C. Power accuracy: ≤ 0.5%
D. Power amplification factor: 7-segment automatic switching
E. Displacement resolution: 1/1000
F. Displacement accuracy: ≤ 1%
G. Resolution of metal extensometer: 1/1000
H. Accuracy of metal extensometer: ≤ 0.5%
I. Accuracy of large deformation extensometer: ± 1mm
J. Speed range: 0.01-150mm/min (servo system)
5-150mm/min (frequency conversion system)
K. Walking space: 900mm (excluding clamps, special testing space can also be customized according to customer needs)
L. Test width: 480mm (special test widths can also be customized according to customer needs)
M. Power supply: Φ 380V 50HZ
N. Power: Approximately 5.5KW
O. Machine size: approximately 1090 x 840 x 2100 mm (length x width x height)
P. Machine weight: approximately 1400kg

II Detailed Configuration
A. High precision American power transmission sensor: 300KN. The power accuracy is within ± 0.5%. (Servo system)
High precision domestic force sensor: 300KN. The power accuracy is within ± 1%. (Variable frequency system)
B. Capacity segmentation: Seven levels throughout the process: × 1, × 2, × 5, × 10, × 20, × 50, × 100. High precision 24 bits A/D is used, with a sampling frequency of 200Hz and a full range force resolution of 1/1000000
C. Power system: Japanese Panasonic servo motor+Panasonic servo+Shanghai reducer+Taiwan Rolling Stone ball screw+smooth rod linear bearing+American transmission sensor
D. Zhonglian board adjustment has fast coarse adjustment and slow fine adjustment functions. Automatically return to the origin and store after testing.
E. Data transmission method: RS232 transmission
F. Display mode: UTM107+WIN-XP test software computer screen display.
G. A concise linear dual correction system with full range one gear and precise full range seven gear force.
H. The luxury testing interface software can achieve control modes such as fixed speed, positioning movement, fixed load (with adjustable holding time), fixed load increase rate, fixed stress increase rate, and fixed strain increase rate, as well as multiple control modes to meet different testing requirements.
I. Testing space: Testing width of approximately 350 mm, beam walking space of 900 mm (excluding fixtures)
J. Full displacement: 1800 P/R, improving accuracy by 4 times LINE DRIVE has extremely strong anti-interference ability
Displacement analysis 0.001mm. Small deformation: metal extensometer, analysis 0.001mm (optional)
K. Safety devices: overload emergency stop device, upper and lower travel limit device, leakage automatic power-off system, automatic breakpoint shutdown function.
L. Manual control method: Wireless remote control device or manual operation box can be added.

III Software Introduction
A. Modular functionality of testing standards: Provides users with the ability to set testing standards for their desired applications, covering GB, ASTM, DIN, JIS, BS, and more. Test standard specifications.
B. Sample data: Provide users with the ability to set all sample data and input it repeatedly. And the formula can be self modified to improve the fit of the test data.
C. Dual report editing: Fully open for users to edit reports, allowing testers to choose their preferred report format (the test program has added built-in EXCEL report editing function, expanding the previous pattern of single professional reports)
D. The lengths, force units, and display digits are dynamically interchanged. The force units are T, Kg, N, KN, g, and lb, and the deformation units are mm, cm, and inch
E. Auto Scale for graph curve scaling enables graphs to be displayed at scale. And it can dynamically switch graphics in real-time during testing. It has load displacement, load time, displacement time, stress-strain, load-2 point extension diagram, and multi curve comparison.
F. The test results can be output in the form of EXCEL data format.
G. After the test is completed, it can be automatically archived or manually archived. After the test is completed, the force, upper and lower yield strengths, hysteresis loop, stepwise approximation method, non proportional elongation strength, tensile strength, compressive strength, fixed elongation strength at any point, fixed load extension at any point, elastic modulus, elongation rate, peel off interval large and small values, average value, net energy, folding energy, total energy, bending modulus, breakpoint displacement x% load, breakpoint load X% displacement, and so on can be automatically calculated. Data backup: Test data can be saved on any hard drive partition.
H. Randomly switch between multiple languages: Simplified Chinese, Traditional Chinese, and English.
I. The software has the function of demonstrating historical test data.