Establish regression lines and circles; Establish points, intersections, self owned points, midpoints, and low points

Calculate radius, distance, angle, coordinates, and linear tolerances

Comparison between actual value and nominal value

Monitoring tolerance

Combining elements, that is, changing to reliable reference elements in real-time when changes occur

Password protection sets user access permissions

The direct evaluation process includes geometric evaluation, measurement force evaluation, and deviation compensation

Using the driver CD 120, the CD 120 comes with a dedicated measuring arm for quick and flexible adjustment. The measuring arm can be replaced without the need for any tools, and the evaluation data for each measuring arm is stored separately

The horizontal measurement stroke of the driver is 120mm, and the vertical measurement stroke is 50mm. The measuring arm can be adjusted to automatically raise and lower the speed; The force measurement setting can be changed from 1mN to 120mN

Can display operating procedures

Interactive operational elements support evaluation and automatic operation programs

Use a "dual probe" to measure the upper and lower contours and conduct mutual evaluation

Can cross obstacles for segmentation measurement, such as small holes and steep edges

Comprehensively establish virtual appearances of straight and curved lines

Directly comparing virtual and real appearance, different measurement ranges can be evaluated based on the measured appearance, and each range can be assigned different tolerances and evaluations

Combined with high-precision driver LD120 and ST500 or ST750 measurement workbench, it can achieve a resolution in the micrometer range.

Measurement accuracy:<1 μ m (within 120mm)