Hydraulic punching machines are suitable for cutting various product accessories, stamping metal parts, shallow stretching, cold extrusion molding, stamping non-metallic parts, and cutting burrs on aluminum castings. They are also used for limited molding processing of various products, as well as for cutting plastic, rubber, and leather products. Typical products that can be restricted include automotive parts, watch cases and straps, eyeglass structures, photo frames, tableware, signs, locks, hardware parts, etc.

Product features:

1. Using hydraulic oil as the power source, external three-phase AC380V 50HZ or three-phase AC22060HZ AC power supply, (single-phase AC220 civilian power supply can also be used according to customer needs)

2. This series of equipment uses liquid as a medium to transfer energy, with high efficiency and an average stamping cycle of less than 1.5 seconds

3. When the device is in standby mode, the noise should not exceed 60 decibels (Using a single-phase motor, the noise level during standby is 50 decibels)

4. The vertical accuracy of the activity board is controlled by four fine guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.03mm

5. Use adjustable positioning oil cylinder, with high positioning accuracy at the bottom dead center and a repeatability accuracy of less than 0.01mm. 100% guarantee of limited depth

6. It has automatic counting function, with two control methods: manual and automatic. The press fit upper mold can be manually stopped within any travel range. It is equipped with an emergency up button and can also be equipped with an infrared handguard device

7. The maximum stamping area can reach 500MM * 500MM (equivalent to a 21 inch LCD display screen)

The descent speed of the spindle is 250MM/s,

9. Customers can adjust the pressure, downward stroke, downward time, and closing height by themselves, making it convenient to operate;

10. The hydraulic system has a built-in oil tank at the bottom, with a clean and stable appearance Underneath the workbench are casters and foot cups, which can be easily moved. The weight of this series of models does not exceed 800KG

11. The output of 3T-100T is available for users to choose from, and can also be customized according to customer needs.