MPP power pipes, also known as MPP power cable protection pipes or MPP cable protection pipes, are divided into excavation and non excavation types. MPP non excavation power pipes are also known as MPP top pipes or drag pipes.

1、 MPP Power Tube Product Introduction:

MPP power pipes use modified polypropylene as the main raw material, which does not require extensive dredging, excavation, or damage to the road surface. They can be used for laying pipelines, cables, and other construction projects in special areas such as roads, railways, buildings, and riverbeds. Compared with the traditional method of "digging trenches and burying pipes", non excavation power pipe engineering is more suitable for current environmental protection requirements, removing disturbing factors such as dust flying and traffic congestion caused by traditional construction. This technology can also be used to lay pipelines in areas where excavation operations cannot be carried out, such as historical sites, urban areas, crop and farmland protection areas, highways, rivers, etc.

The characteristics of high temperature resistance and external pressure resistance make it suitable for cable conduit pipes of high-voltage transmission lines above 10KV.

110mm to 250mm, divided into ordinary and reinforced types. The ordinary type is suitable for excavation and laying construction, as well as non excavation crossing construction with a burial depth of less than 4M; The reinforced type is suitable for non excavation crossing construction projects with a burial depth greater than 4M. This product has passed the testing of the National Chemical Building Materials Testing Center and achieved good social and economic benefits.

2、 Scope of application of MPP power pipe:

MPP power pipes can be widely used in municipal, telecommunications, power, gas, tap water, thermal and other pipeline projects.

MPP power pipe urban and rural non excavation horizontal directional drilling power pipe engineering, as well as open excavation power pipe engineering.

MPP power pipe urban and rural non excavation horizontal directional drilling sewage discharge pipe project. Industrial wastewater discharge project.

3、 The superiority of MPP power pipes

1. MPP power pipes have excellent electrical insulation properties.

2. MPP power pipes have high thermal deformation temperature and low-temperature impact performance.

3. MPP power pipes have higher tensile and compressive properties than HDPE.

4. MPP power pipes are lightweight, smooth, have minimal friction, and can be welded together by hot melt welding.

5. MPP power pipes have a long-term operating temperature range of 5-70 ℃.

6. MPP Pipe Construction Instructions

During the transportation and construction of MPP power pipe materials, it is strictly prohibited to throw, hit, scratch, or expose them to sunlight at will.

When MPP power pipes are hot-melt connected, the axis of the two pipes should be aligned, and the end face cutting should be vertical and flat.

Adjust the processing temperature, time, pressure, and climate conditions of MPP power pipes accordingly.

The small bending radius of MPP power pipe material should be ≥ 75 pipe outer diameter.

4、 Physical properties of MPP power pipes