Detailed information of MIT230 insulation resistance tester

Brand: MEGGER
Origin: MEGGER, USA
Supplier: Shenzhen Yinfei Electronic Technology Co., Ltd
MEGGER from the United StatesMIT230/MIT230/MIT230 Insulation Resistance TesterProduct Introduction
MEGGER from the United StatesMIT230/MIT230/MIT230 Insulation Resistance TesterConsultation: Shenzhen Yinfei Electronic Technology provides spot supply to MEGGER in the United StatesMIT230/MIT230/MIT230 Insulation Resistance TesterProduct prices, specifications, model pictures, brands/trademarks, inventory, etc., dry body furnace Yinfei Electronics gathers spot goods, products, and various models from all over the country. Here we supply you with American MEGGERMIT230/MIT230/MIT230 Insulation Resistance TesterAs a product sales company in China, Yinfei has prepared a large amount of spot goods for users to choose from. The following are detailed parameter specifications and other information. For more detailed information on the testing instrument, you can enter "1001718" in the Baidu input box and press Enter to enter Silver Fly for viewing. This product is supplied by Shenzhen Yinfei Electronic Technology Co., Ltd., Hong; Address: Room 2217, Block A, Qunxing Plaza, Huaqiangbei, Futian District, Shenzhen.

MIT230 Insulation Resistance TesterProduct Introduction:
Insulation test impedance reaches 1000 M Ω
Test voltage 250V, 500V, 1000V
• Circuit live warning (display voltage) and lockout test
• Digital/Analog Display
• Powered by alkaline or rechargeable batteries
Operating temperature ranges from -10 º C to+55 º C
• Compliant with EN61557-1 standard
It is currently the smallest insulation resistance testing instrument on the market
Three operating voltages are provided for selection
There are digital and analog displays on the display screen to show the tested values
This instrument is made of hard ABS, designed reasonably, and very convenient to use. Its small size allows the instrument to be placed in a pocket when not in use
The instrument uses 6 AA batteries or rechargeable batteries. When the battery is running low, an alarm will sound

Product features:
• Compliant with EN61557-1 standard
The testing range reaches 1000 M Ω
Continuous range resolution reaches 0.01 Ω, and short-circuit current exceeds 200 mA
During automatic continuity testing, there is no need to use exception operation buttons
When unmanned, the instrument will automatically shut down to prevent battery waste
When connected to a point-to-point circuit
Test wire zero impedance to compensate for errors caused by test wire resistance

Product Features:
• Dual display of digital/analog test results
Simulate the display pointer to show the charging and discharging process of the tested sample
• Basic voltage display function
The instrument is equipped with a built-in voltmeter, which automatically turns on the voltage display function when the wire is connected to any external source greater than 25VAC or DC
Basic Test Automatic Protection
Equipped with external voltage display warning and voltage protection, the instrument will automatically interrupt when it comes into contact with an external voltage source during the measurement process
• Testing for protection
Any external voltage greater than 25V will display a warning message on the instrument panel. If it is greater than 25V, the instrument will temporarily stop insulation or conduction testing to protect the user's safety
• Insulation resistance test
Insulation resistance test reaches 1000M Ω (megaohms)
After each test, the instrument will automatically discharge the tested sample safely
Before selecting the 1000V voltage range for testing, the instrument will display a high voltage warning to alert the user
Conductivity test
Conductivity test: The lowest resistance at 200mA is 0.01 ohms (Ω)
The conductivity test of this series of products meets the standard (200mA). After adjusting the rotary switch to the conductivity test, the instrument will automatically perform the corresponding test without the need to press the test button again. The resolution is 0.01 ohms (Ω)
The zero adjustment range of the test line is 0~99.9 ohms, and the instrument can automatically zero
• Buzzer
The instrument is equipped with a buzzer, which can quickly determine the conductivity status of the circuit during conductivity testing
• Instrument power supply
6X1.5VAA alkaline dry battery or rechargeable battery
Working environment temperature: -10 ℃ to+55 ℃
• Instrument safety standards
Compliant with IEC 61010 safety standard, CATIII600V (Class III 600V safety standard)
The testing method complies with EN61557-1 standard