VIP member
MIES-5708 EN50155 8GE M12 Card Rail Full Gigabit Managed Industrial Ethernet Switch
MIES-5708 EN50155 8GE M12 card rail type full gigabit network management industrial Ethernet switch supports 8 10/100/1000M Ethernet M12 interfaces, s
Product details
product overviewMIES-5708The network managed industrial Ethernet switch has a high-performance switching engine, adopts a store and forward switching method, complies with the IEEE802.3/IEEE802.3u/IEEE802.3ab/IEEE802.3z standards, can provide full line speed non blocking forwarding, provides 8 10/100/1000M Ethernet M12 interfaces, and supports POE power supply. This switch can form a fast recovery self-healing ring network, with a self-healing time of less than 20ms, and supports automatic detection and switching of the ring. MIES-5708 provides rich network management functions, supporting MR ring fast ring network, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, static multicast, broadcast storm suppression, port aggregation, port mirroring, port status management, port monitoring, SNMP, NTP timing, ring network alarm, etc. Specially suitable for building gigabit networks with high bandwidth transmission requirements for video, audio, and other services in fields such as video surveillance, intelligent transportation, and industrial automation. At present, this product is widely used in industrial harsh environments such as intelligent transportation, energy wind power, pipe gallery tunnels, intelligent substations, etc.
MIES-5708The network managed industrial Ethernet switch has a high-performance switching engine, adopts a store and forward switching method, complies with the IEEE802.3/IEEE802.3u/IEEE802.3ab/IEEE802.3z standards, can provide full line speed non blocking forwarding, provides 8 10/100/1000M Ethernet M12 interfaces, and supports POE power supply. This switch can form a fast recovery self-healing ring network, with a self-healing time of less than 20ms, and supports automatic detection and switching of the ring. MIES-5708 provides rich network management functions, supporting MR ring fast ring network, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, static multicast, broadcast storm suppression, port aggregation, port mirroring, port status management, port monitoring, SNMP, NTP timing, ring network alarm, etc. Specially suitable for building gigabit networks with high bandwidth transmission requirements for video, audio, and other services in fields such as video surveillance, intelligent transportation, and industrial automation. At present, this product is widely used in industrial harsh environments such as intelligent transportation, energy wind power, pipe gallery tunnels, intelligent substations, etc.
Product parameters
attribute |
MIES-5708 |
interface |
8A 10/100/1000Mbps M12 Ethernet interface |
Network cable type and distance |
Twisted pair cable, supporting a maximum transmission distance of 100m |
Optical port attribute |
Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized) |
Process type |
store and forward |
MACAddress table size |
Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC? |
backplane bandwidth |
16Gbps |
Packet forwarding rate |
11.9Mpps |
Package cache |
4Mbit |
flow control |
Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression |
Ring network redundancy protocol |
Support MR ring protocol (self-healing time<20ms) |
Spanning-Tree |
Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard? |
VLAN |
Support port based VLANs (4094), 802.1Q VLANs Support GVRP |
Self healing ring networking method |
Support multiple self-healing rings Support tangent rings |
Link Aggregation |
Support static aggregation and dynamic aggregation |
Jumbo Framejumbo frame |
support,The maximum frame length is9K |
DHCP |
supportDHCP Client |
broadcast/Multicast/Unicast storm suppression |
Support storm suppression based on port rate percentage |
Multicast |
Support IGMP Snooping |
QoS |
Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR |
ACL |
Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number Support inbound ACL strategy |
Port Mirror |
Support port mirroring |
network security |
Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation |
802.1X |
Support port based authentication and MAC based authentication |
Upgrade and Configuration |
Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload |
Alarm output |
Support power alarm |
manage |
Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP |
maintenance |
Support Ping Support Telnet remote maintenance |
pilot lamp |
Power indicator: P1, P2, interface light indicator: ALarm, RUN, G9, G10, G11, G12 |
power supply |
Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring |
work environment |
Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation |
Installation method |
DINCard rail or wall mounted |
External dimensions |
Width x Height x Depth: 77 x 154.5 x 127.5mm |
protection grade |
IP40provide againstProtection, etcGrade, fanless design |
MTBF |
350000h |
Warranty period |
5year |
Compliant with standards |
IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control |
EMI |
Electromagnetic interference level test |
EMC |
IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s) |
attribute |
MIES-5708 |
interface |
8A 10/100/1000Mbps M12 Ethernet interface |
Network cable type and distance |
Twisted pair cable, supporting a maximum transmission distance of 100m |
Optical port attribute |
Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized) |
Process type |
store and forward |
MACAddress table size |
Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC? |
backplane bandwidth |
16Gbps |
Packet forwarding rate |
11.9Mpps |
Package cache |
4Mbit |
flow control |
Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression |
Ring network redundancy protocol |
Support MR ring protocol (self-healing time<20ms) |
Spanning-Tree |
Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard? |
VLAN |
Support port based VLANs (4094), 802.1Q VLANs Support GVRP |
Self healing ring networking method |
Support multiple self-healing rings Support tangent rings |
Link Aggregation |
Support static aggregation and dynamic aggregation |
Jumbo Framejumbo frame |
support,The maximum frame length is9K |
DHCP |
supportDHCP Client |
broadcast/Multicast/Unicast storm suppression |
Support storm suppression based on port rate percentage |
Multicast |
Support IGMP Snooping |
QoS |
Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR |
ACL |
Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number |
Port Mirror |
Support port mirroring |
network security |
Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation |
802.1X |
Support port based authentication and MAC based authentication |
Upgrade and Configuration |
Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload |
Alarm output |
Support power alarm |
manage |
Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP |
maintenance |
Support Ping Support Telnet remote maintenance |
pilot lamp |
Power indicator: P1, P2, interface light indicator: ALarm, RUN, G9, G10, G11, G12 |
power supply |
Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring |
work environment |
Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation |
Installation method |
DINCard rail or wall mounted |
External dimensions |
Width x Height x Depth: 77 x 154.5 x 127.5mm |
protection grade |
IP40provide againstProtection, etcGrade, fanless design |
MTBF |
350000h |
Warranty period |
5year |
Compliant with standards |
IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control |
EMI |
Electromagnetic interference level test |
EMC |
IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s) |
Installation diagram
Ordering Information
PRODUCT MODEL |
Specification parameters |
MIES-5708 |
8A 10/100/1000M M12 interface, supporting network management,Voltage: DC12/24V, AC/DC85-265V optional |
Options
PRODUCT MODEL |
description |
|
SFPmodule |
ME-S2101 |
SFP with 10M/100M/1000M（RJ-45） |
ME-S2118-S |
SFP 1.25G/1.0625G、 850nm LC 550m |
|
ME-S2123-S |
SFP 1.25G/1.0625G、 1310nm LC 20km |
|
ME-S2123-S40 |
SFP 1.25G/1.0625G、1310nm LC 40km |
|
ME-S2125-S80 |
SFP 1.25G/1.0625G、1550nm LC 80km |
|
ME-S2123S-S |
SFP 1.25G/1.0625G、 1310nm single fiber LC 20km |
|
ME-S2123S-S40 |
SFP 1.25G/1.0625G、 1310nm single fiber LC 40km |
|
ME-S2125S-S80 |
SFP 1.25G/1.0625G、 1550nm single fiber LC 80km |
|
PRODUCT MODEL |
Specification parameters |
MIES-5708 |
8A 10/100/1000M M12 interface, supporting network management,Voltage: DC12/24V, AC/DC85-265V optional |
Options
PRODUCT MODEL |
description |
|
SFPmodule |
ME-S2101 |
SFP with 10M/100M/1000M（RJ-45） |
ME-S2118-S |
SFP 1.25G/1.0625G、 850nm LC 550m |
|
ME-S2123-S |
SFP 1.25G/1.0625G、 1310nm LC 20km |
|
ME-S2123-S40 |
SFP 1.25G/1.0625G、 1310nm LC 40km |
|
ME-S2125-S80 |
SFP 1.25G/1.0625G、1550nm LC 80km |
|
ME-S2123S-S |
SFP 1.25G/1.0625G、 1310nm single fiber LC 20km |
|
ME-S2123S-S40 |
SFP 1.25G/1.0625G、 1310nm single fiber LC 40km |
|
ME-S2125S-S80 |
SFP 1.25G/1.0625G、 1550nm single fiber LC 80km |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-