MIE-5620-GX4L37 16FE+4GSFP card rail gigabit network management industrial Ethernet switch-Fornitore globale

product overview

MIE-5620-GX4L37Network managed industrial Ethernet switch, providing 16 10/100M adaptive network ports and 4 1000M SFP expansion slots. This switch can form a fast recovery self-healing ring network with a self-healing time of less than 20ms, providing strong security for users' networks; Supporting automatic detection and switching of loops, MIE-5620-GX4L37 provides rich network management functions,Support MR ring fast network, compatible with STP/RSTP/MSTP,Port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, broadcast storm suppression, port aggregation, port mirroring, port status management, SNMP, NTP timing, etc. The protection level reaches IP40, the anti strong vibration card rail seat supports DC dual power supply, low-power fanless heat dissipation technology, extreme environmental temperature adaptability from -40 ℃ to+85 ℃, and good EMC electromagnetic compatibility performance, making this series of products capable of stable and reliable operation in harsh industrial environments. At present, this product has been widely used in industrial fields such as intelligent transportation, rail transit, wind power, urban utility tunnels, new energy, State Grid, and industrial control.

Product parameters

attribute	MIE-5620-GX4L37
interface	16A 10/100Base-T (X) adaptive Ethernet RJ45 interface 4A 1000M SFP expansion slot
Network cable type and distance	Twisted pair cable, supporting a maximum transmission distance of 100m
Optical port attribute	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
Process type	store and forward
MACAddress table size	Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Support static multicast MAC
backplane bandwidth	128Gbps
Packet forwarding rate	20Mpps
Package cache	4Mbit
flow control	Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression
Ring network redundancy protocol	Support MR ring protocol (self-healing time<20ms)
Spanning-Tree	Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard
VLAN	Support port based VLANs (4094), 802.1Q VLANs Support GVRP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Link Aggregation	Support static aggregation and dynamic aggregation
Jumbo Framejumbo frame	support,The maximum frame length is9K
DHCP	supportDHCP Client
broadcast/Multicast/Unicast storm suppression	Support storm suppression based on port rate percentage
Multicast	Support IGMP Snooping
QoS	Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR
ACL	Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number Support inbound ACL strategy
Port Mirror	Support port mirroring
network security	Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation
802.1X	Support port based authentication and port based authenticationMACThe certification
Upgrade and Configuration	Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload
Alarm output	Support power alarm
manage	Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP
maintenance	Support Ping Support Telnet remote maintenance
pilot lamp	Power indicator: P1, P2, interface light indicator: Alarm, RUN, GX
power supply	Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring
work environment	Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation
Installation method	DINCard rail or wall mounted
External dimensions	Width x Height x Depth: 55.5 x 154.5 x 127.5mm
protection grade	IP40protection grade Built in heat sink, passive heat dissipation, fanless design
MTBF	350000h
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

attribute	MIE-5620-GX4L37
interface	16A 10/100Base-T (X) adaptive Ethernet RJ45 interface 4A 1000M SFP expansion slot
Network cable type and distance	Twisted pair cable, supporting a maximum transmission distance of 100m
Optical port attribute	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
Process type	store and forward
MACAddress table size	Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Support static multicast MAC
backplane bandwidth	128Gbps
Packet forwarding rate	20Mpps
Package cache	4Mbit
flow control	Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression
Ring network redundancy protocol	Support MR ring protocol (self-healing time<20ms)
Spanning-Tree	Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard
VLAN	Support port based VLANs (4094), 802.1Q VLANs Support GVRP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Link Aggregation	Support static aggregation and dynamic aggregation
Jumbo Framejumbo frame	support,The maximum frame length is9K
DHCP	supportDHCP Client
broadcast/Multicast/Unicast storm suppression	Support storm suppression based on port rate percentage
Multicast	Support IGMP Snooping
QoS	Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR
ACL	Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number Support inbound ACL strategy
Port Mirror	Support port mirroring
network security	Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation
802.1X	Support port based authentication and port based authenticationMACThe certification
Upgrade and Configuration	Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload
Alarm output	Support power alarm
manage	Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP
maintenance	Support Ping Support Telnet remote maintenance
pilot lamp	Power indicator: P1, P2, interface light indicator: Alarm, RUN, GX
power supply	Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring
work environment	Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation
Installation method	DINCard rail or wall mounted
External dimensions	Width x Height x Depth: 55.5 x 154.5 x 127.5mm
protection grade	IP40protection grade Built in heat sink, passive heat dissipation, fanless design
MTBF	350000h
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

Installation diagram

Ordering Information

PRODUCT MODEL	Specification parameters
MIE-5620-GX4L37	16A 10/100M electrical port, supporting network management
MIE-5620-GX4L37-GX4	16One 10/100M electrical port, four 1000M SFP expansion slots, supporting network management

PRODUCT MODEL	Specification parameters
MIE-5620-GX4L37	16A 10/100M electrical port, supporting network management
MIE-5620-GX4L37-GX4	16One 10/100M electrical port, four 1000M SFP expansion slots, supporting network management