VIP member
MIE-5610 4GE+2GSFP card rail full gigabit network management industrial Ethernet switch
MIE-5610 4GE+2GSFP card rail full gigabit network managed industrial Ethernet switch supports 4 10/100/1000M adaptive Ethernet RJ45 interfaces, 2 1000
Product details
product overviewMIE-5610The network managed industrial Ethernet switch has a high-performance switching engine and adopts a store and forward switching method, which complies with the IEEE802.3/IEEE802.3u/IEEE802.3ab/IEEE802.3z standards. It can provide full line speed non blocking forwarding, 4 10/100/1000M adaptive network ports, and 2 1000M SFP expansion slots. This switch can form a fast recovery self-healing ring network, with a self-healing time of less than 20ms, and supports automatic detection and switching of the ring. MIE-5610 provides rich network management functions,Support MR ring fast network, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, broadcast storm suppression, port aggregation, port mirroring, port status management, SNMP, NTP timing, etc. Specially suitable for building gigabit networks with high bandwidth transmission requirements for video, audio, and other services in fields such as video surveillance, intelligent transportation, and industrial automation. At present, this product has been widely used in industrial fields such as intelligent transportation, rail transit, wind power, urban utility tunnels, new energy, State Grid, and industrial control.
MIE-5610The network managed industrial Ethernet switch has a high-performance switching engine and adopts a store and forward switching method, which complies with the IEEE802.3/IEEE802.3u/IEEE802.3ab/IEEE802.3z standards. It can provide full line speed non blocking forwarding, 4 10/100/1000M adaptive network ports, and 2 1000M SFP expansion slots. This switch can form a fast recovery self-healing ring network, with a self-healing time of less than 20ms, and supports automatic detection and switching of the ring. MIE-5610 provides rich network management functions,Support MR ring fast network, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, broadcast storm suppression, port aggregation, port mirroring, port status management, SNMP, NTP timing, etc. Specially suitable for building gigabit networks with high bandwidth transmission requirements for video, audio, and other services in fields such as video surveillance, intelligent transportation, and industrial automation. At present, this product has been widely used in industrial fields such as intelligent transportation, rail transit, wind power, urban utility tunnels, new energy, State Grid, and industrial control.
Product parameters
attribute |
MIE-5610 |
interface |
4A 10/100/1000Base-T (X) adaptive Ethernet RJ45 interface 2A 1000M SFP expansion slot |
Network cable type and distance |
Twisted pair cable, supporting a maximum transmission distance of 100m |
Optical port attribute |
Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized) |
Process type |
store and forward |
MACAddress table size |
Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC? |
backplane bandwidth |
128Gbps |
Packet forwarding rate |
9Mpps |
Package cache |
3Mbit |
flow control |
Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression |
Ring network redundancy protocol |
Support MR ring protocol (self-healing time<20ms) |
Spanning-Tree |
Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard? |
VLAN |
Support port based VLANs (4094), 802.1Q VLANs Support GVRP |
Self healing ring networking method |
Support multiple self-healing rings Support tangent rings |
Link Aggregation |
Support static aggregation and dynamic aggregation |
Jumbo Framejumbo frame |
support,The maximum frame length is9K |
DHCP |
supportDHCP Client |
broadcast/Multicast/Unicast storm suppression |
Support storm suppression based on port rate percentage |
Multicast |
Support IGMP Snooping |
QoS |
Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR |
ACL |
Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number |
Port Mirror |
Support port mirroring |
network security |
Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation Support IP scanning protection, broiler protection, UDP port scanning protection, TCP port scanning protection, and worm virus propagation protection Support front-end camera recognition and admission, unauthorized camera recognition and rejection, and counterfeit terminal recognition functions |
802.1X |
Support port based authentication and port based authenticationMACThe certification |
Upgrade and Configuration |
Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload |
Alarm output |
Support power alarm |
manage |
Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP |
maintenance |
Support Ping Support Telnet remote maintenance |
pilot lamp |
Power indicator: PWR1, PWR2, interface light indicator: Link, SPEED, ALarm, Run |
power supply |
Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring |
work environment |
Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～+85℃ Relative humidity:5%~95% no condensation |
Installation method |
DINCard rail or wall mounted |
External dimensions |
Width x Height x Depth: 53 x 140 x 119.5mm |
protection grade |
IP40Protection level, fanless design |
MTBF |
350000h |
Warranty period |
5year |
Compliant with standards |
IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control |
EMI |
Electromagnetic interference level test |
EMC |
IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s) |
attribute |
MIE-5610 |
interface |
4A 10/100/1000Base-T (X) adaptive Ethernet RJ45 interface 2A 1000M SFP expansion slot |
Network cable type and distance |
Twisted pair cable, supporting a maximum transmission distance of 100m |
Optical port attribute |
Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized) |
Process type |
store and forward |
MACAddress table size |
Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC? |
backplane bandwidth |
128Gbps |
Packet forwarding rate |
9Mpps |
Package cache |
3Mbit |
flow control |
Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression |
Ring network redundancy protocol |
Support MR ring protocol (self-healing time<20ms) |
Spanning-Tree |
Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard? |
VLAN |
Support port based VLANs (4094), 802.1Q VLANs Support GVRP |
Self healing ring networking method |
Support multiple self-healing rings Support tangent rings |
Link Aggregation |
Support static aggregation and dynamic aggregation |
Jumbo Framejumbo frame |
support,The maximum frame length is9K |
DHCP |
supportDHCP Client |
broadcast/Multicast/Unicast storm suppression |
Support storm suppression based on port rate percentage |
Multicast |
Support IGMP Snooping |
QoS |
Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR |
ACL |
Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number |
Port Mirror |
Support port mirroring |
network security |
Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation Support IP scanning protection, broiler protection, UDP port scanning protection, TCP port scanning protection, and worm virus propagation protection Support front-end camera recognition and admission, unauthorized camera recognition and rejection, and counterfeit terminal recognition functions |
802.1X |
Support port based authentication and port based authenticationMACThe certification |
Upgrade and Configuration |
Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload |
Alarm output |
Support power alarm |
manage |
Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP |
maintenance |
Support Ping Support Telnet remote maintenance |
pilot lamp |
Power indicator: PWR1, PWR2, interface light indicator: Link, SPEED, ALarm, Run |
power supply |
Input voltage: DC12/24V, AC/DC85-265V optional Support power loss alarm function (DC12V/DC24V) Support power anti reverse protection Industrial Phoenix Terminal Wiring |
work environment |
Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～+85℃ Relative humidity:5%~95% no condensation |
Installation method |
DINCard rail or wall mounted |
External dimensions |
Width x Height x Depth: 53 x 140 x 119.5mm |
protection grade |
IP40Protection level, fanless design |
MTBF |
350000h |
Warranty period |
5year |
Compliant with standards |
IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control |
EMI |
Electromagnetic interference level test |
EMC |
IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s) |
Installation diagram 
Ordering Information
PRODUCT MODEL |
Specification parameters |
MIE-5610-PXGS2T4-81 |
410/100/1000M Ethernet ports, 2 1000M SFP expansion slots (including 2 Gigabit single-mode 20km optical modules), supporting network management, input voltage: DC12/24V, AC/DC85V-265V |
PRODUCT MODEL |
Specification parameters |
MIE-5610-PXGS2T4-81 |
410/100/1000M Ethernet ports, 2 1000M SFP expansion slots (including 2 Gigabit single-mode 20km optical modules), supporting network management, input voltage: DC12/24V, AC/DC85V-265V |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-